Abstract：High frequency attenuation parameter of medium voltage power cable is essential for Partial discharge detection and location. This paper evaluates the attenuation parameter by the vector fitting algorithm, and the simulation results are in accordance to the experimental results in the frequency range of 1~10MHz.
陆海陵, 徐澄吉, 唐明, 赵成斌, 李成岭. 基于矢量匹配算法评估电缆高频衰减参数的研究[J]. 电气技术, 2015, 16(07): 6-9.
Lu Hailing, Xu Chengji, Tang Ming, Zhao Chengbin, Li Chengling. Research on High Frequency Parameters of Medium Voltage Cable by the Vector Fitting Method. Electrical Engineering, 2015, 16(07): 6-9.
[1] Gustavsen B, Semlyen A. Rational approximation of frequency domain responses by vector fitting[J]. Power Delivery, IEEE Transactions on, 1999, 14(3): 1052-1061. [2] Gustavsen B, Semlyen A. Combined phase and modal domain calculation of transmission line transients based on vector fitting[J]. IEEE Transactions on Power Delivery, 1998, 13(2): 596-604. [3] Gustavsen B, Heitz C. Fast realization of the modal vector fitting method for rational modeling with accurate representation of small eigenvalues[J]. IEEE Transactions on Power Delivery, 2009, 24(3): 1396- 1405. [4] Antonini, G. SPICE equivalent circuits of frequency- domain responses[J]. IEEE Transactions on Electromagnetic Compatibility, 2003, 45(3): 502-512. [5] Weens Y, Idir N, Bausière R, et al. Modeling and simulation of unshielded and shielded energy cables in frequency and time domains[J]. IEEE Transactions on Magnetics, 2006, 42(7): 1876-1882. [6] Dhaene T, Zutter de D. Selection of lumped element models for coupled lossy transmission-lines[J]. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 1992, 11(7): 805-815. [7] Lin S, Kuh ES. Transient simulation of lossy interconnects based on the recursive convolution formulation[J]. Circuits and Systems I: Fundamental Theory and Applications, IEEE Transactions on, 1992, 39(11): 879-892. [8] Vu Dinh T, Cabon B, Chilo J. SPICE simulation of lossy and coupled interconnection lines.Components, Packaging, and Manufacturing Technology, Part B[J]. IEEE Transactions on Advanced Packaging, 1994, 17(2): 134-146. [9] Hendrickx W, Dhaene T. A discussion of "Rational approximation of frequency domain responses by vector fitting"[J]. Power Systems, IEEE Transactions on, 2006, 21(1): 441-443. [10] Ferranti F, Rolain Y, Knockaert L, et al. Variance weighted vector fitting for noisy frequency responses[J]. IEEE Microwave and Wireless Components Letters, 2010, 20(4): 187-189. [11] Fu Wn, Zhang X, Ho S L. A fast algorithm for Frequency-Domain solutions of electromagnetic field computation of electric devices using Time-Domain Finite-Element method[J]. IEEE Transactions on Magnetics, 2013, 49(1): 530-535.
2015, Vol. 16 
