研究与开发
链式静止同步补偿器的设计与仿真研究
邵燕秋,邵宜祥,简优宗,陈董秀,朱菲菲
国网电力科学研究院,南京 211000
Design and Simulation Study on Cascade Static Synchronous Compensator
Shao Yanqiu Shao Yixiang Jian Youzong Chen Dongxiu, Zhu Feifei
State Grid Electric Power Research Institute, Nanjing 211000
摘要 分析了链式静止同步补偿器的主电路拓扑结构和功率单元结构,阐述了双极性PWM调制方法和载波移相角的选取,采用恒无功控制理论搭建了基于PI控制的控制电路,并且给出了PSCAD|EMTDC仿真结果。仿真结果说明了系统设计的合理性和可靠性,也说明了STATCOM作为新一代FACTS装置具有良好的性能。
关键词 ：
链式静止同步补偿器 ,
PWM调制 ,
载波移相角 ,
控制电路
Abstract ：This paper analyzed the main circuit topology and power unit structure of the cascade static synchronous compensator. This paper analyzed the bipolar PWM modulation method and how to select the carrier phase-shifting angle, then constructed the control circuit according to the constant reactive power control theory based on PI control and presented the PSCAD/EMTDC simulation results. The simulation results validated the rationality and reliability of the system, and proved that STATCOM as a new generation of FACTS device has a good performance.
Key words ：
cascade static synchronous compensator
PWM modulation
carrier phase-shifting angle
control circuit
出版日期: 2016-08-24
作者简介 : 邵燕秋（1987-）,女,硕士研究生,主要研究方向为静止无功补偿器和静止变频启动器。
引用本文:
邵燕秋,邵宜祥,简优宗,陈董秀,朱菲菲. 链式静止同步补偿器的设计与仿真研究[J]. 电气技术, 2016, 17(8): 28-32.
Shao Yanqiu Shao Yixiang Jian Youzong Chen Dongxiu, Zhu Feifei. Design and Simulation Study on Cascade Static Synchronous Compensator. Electrical Engineering, 2016, 17(8): 28-32.
链接本文:
http://dqjs.cesmedia.cn/CN/Y2016/V17/I8/28
[1] 王轩, 林嘉扬, 滕乐天, 等. d-q-0坐标系下链式STATCOM电流控制策略[J]. 中国电机工程学报, 2012, 32(15): 48-54.
2016, Vol. 17 
