变压器绕组辐向稳定性研究

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (11282 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要随着电力系统容量的不断增加,短路故障产生的电动力会引起变压器绕组变形等辐向稳定性的问题,有必要对变压器的绕组进行屈曲分析和弹塑性力学分析。本文采用ANSYS软件对中压侧三相短路状下变压器绕组进行屈曲和弹塑性力学分析,针对50MVA三绕组主变建模,获取中压绕组辐向安全稳定系数。通过事故实例予以验证,此方法对变压器短路影响分析具有一定参考价值,还可对大型变压器的设计及装配带来一定的借鉴意义。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	胡忠平
	廖福旺
	兰生

关键词 ：电力变压器, 场路耦合, 电磁力, 屈曲分析, 弹塑性力学

Abstract：With the increase of the power system capacity, it is necessary for the transformer windings to carry on the buckling and elastic-plastic mechanics analysis, because electrodynamic force that the short-circuit trouble produces can cause deformation of transformer windings and the problem of the stability in radial direction. The buckling and elastic-plastic mechanics of transformer windings were analyzed by ANSYS software in the medium voltage winding of the three-phase short circuit in this paper. The radial stability coefficient of the medium voltage winding was obtained by the model of 50MVA main transformer of three windings. This method has certain reference value for analysis of transformer short-circuit impact, and also has some reference significance for the design and fabrication of large transformers according to the verified accident examples.

Key words： power transformer field-circuit couple the electromagnetic force buckling analysis elastic-plastic mechanics

出版日期: 2017-04-19

作者简介: 胡忠平（1988-）,男,安徽省桐城市人,硕士研究生,主要研究方向：变压器绕组稳定性的研究。

引用本文:

胡忠平, 廖福旺, 兰生. 变压器绕组辐向稳定性研究[J]. 电气技术, 2017, 18(4): 32-38. Hu Zhongping, Liao Fuwang, Lan Sheng. Research on Radial Stability of Power Transformer. Electrical Engineering, 2017, 18(4): 32-38.

链接本文:

http://dqjs.cesmedia.cn/CN/Y2017/V18/I4/32

[1] 刘兴平, 陈民铀. 一种配电变压器绕组变形故障的在线监测新方法[J]. 电力系统保护与控制, 2013(12): 20-26.
[2] 刘效真, 高占岭, 李秀国, 等. 一起变压器绕组变形故障的分析与判断[J]. 电气技术, 2015, 16(8): 92-94.
[3] 刘航宇, 刘念, 蒲丽娟,等. 基于ANSYS的高压大截面电缆金具短路电动力和机械应力分析[J]. 电工技术学报, 2016(5): 170-176.
[4] Bakshi A, Kulkarni S V. Analysis of buckling strength of inner windings in transformers under radial Short- Circuit forces[J]. IEEE Transactions on Power Delivery, 2014, 29(1): 241-245.
[5] Ahn H M, Lee J Y, Kim J K, et al. Finite-Element analysis of Short-Circuit electromagnetic force in power transformer[J]. Industry Applications, IEEE Transactions on, 2011, 47(3): 1267-1272.
[6] 王录亮. 电力变压器绕组短路力计算[D]. 哈尔滨: 哈尔滨理工大学, 2012.
[7] 刘军, 张安红. 电力变压器绕组短路动稳定能力的仿真和评估[J]. 变压器, 2012, 49(6): 14-25.
[8] 白永刚, 刘文里, 吴明君, 等. 自耦变压器串联绕组辐向稳定性分析[J]. 黑龙江电力, 2014, 36(1): 42-45.
[9] 姜山. 电力变压器绕组变形的受力分析[D]. 北京: 华北电力大学, 2012.
[10] 周国伟, 刘文州, 罗阀, 等. 基于虚功原理的变压器轴向电动力测算[J]. 变压器, 2015(2): 1-5.
[11] 郝文化, 肖新标. ANSYS7.0实例分析与应用[M]. 北京: 清华大学出版社, 2004.
[12] Kojima H, Miyata H, Shida S, et al. Buckling strength analysis of large power transformer windings subjected to electromagnetic force under short circuit[J]. IEEE Transactions on Power Apparatus&Systems, 1980, PAS-99(3): 1288-1297.
[13] 徐健学, 徐子宏. 弹性支持扁拱动力稳定性分析和变压器内线圈短路动稳定分析[J]. 应用力学学报, 1992(2): 14-25.
[14] 李健. 大容量变压器绕组稳定性及油箱强度研究[D]. 沈阳: 沈阳工业大学, 2012: 5-35.