|
|
|
| Based on the Fault Information of Different Ground Fault Identification and Analysis |
| Geng Dongyong, Zhao Guijuan |
| Wanhua Chemical (Ningbo) Co., Ltd, Zhangjiang 315812 |
|
|
|
|
Abstract The system heat thermal oil to 300℃ through electric heater, then oil transfer heater to the waste water, waste water is cracked under high temperature and high pressure. The electric heating system consists of regulator, actuator and the controlled object. And the regulator is S7-200 PLC of Siemens. Two groups of SCR make up of the actuator. The controlled object consists of ten fixed heating groups and two adjustable heating groups. Temperature control mode is PID regulation. By modeling the electric heating system and analyzing the PID adjustment and control program, find problems existing in the system and put forward suggestions.
|
|
Published: 04 November 2014
|
|
|
|
| Cite this article: |
|
Geng Dongyong,Zhao Guijuan. Based on the Fault Information of Different Ground Fault Identification and Analysis[J]. Electrical Engineering, 2014, 15(10): 89-92.
|
|
|
|
| URL: |
|
https://dqjs.cesmedia.cn/EN/Y2014/V15/I10/89
|
[1] 张国良,许建安. 中性点不接地系统两点异地接地距离保护探析[J]. 水电能源科学,2010(9).
[2] 许建安. 中性点不接地系统两点异地接地及故障点位置判别[J].水电能源科学,2008(10).
[3] 马杰,李磊,李乃永,等.基于故障信息的高阻接地故障辨识与定位方法[J].电力系统保护与控制, 2013(6).
[4] 李明伟,吕丞.小电流接地系统异地点两点接地短路分析[J]. 黑龙江科技信息,2012(7).
[5] 黎华,黄金.220kV变电站低压侧电流互感器爆炸实例分析[J].电气开关,2012(1). |
|
|
|
2014, Vol. 15 
