|
|
IGBT Series Resonant Inverter Research and Improvement of the Resistance Spot Welding Machine |
Liu Xiaodong,Yang Yan,Li Fangyuan,Wang Jingbing |
College of Automation Engineering, Qingdao University, Qingdao, Shangdong 266071 |
|
|
Abstract The current circuit of inverter welding power source are mainly single-ended type, half bridge, bridge type three kind of forms, including the application of a half-bridge series resonant inverter resistance is relatively common, but there are big switch loss, low utilization efficiency of power supply and other problems. This topic to solved some problems of the current inverter spot welding machine and the optimization, this paper proposes a new type of low Q value a half-bridge series resonant inverter induction welding power source circuit topology, it can be internal part of the system without the amount of functionality into active energy, and reduces the Q value of the circuit, improve the efficiency of the output of the inverter welding power source, type and by TMS320F2812 DSP for closed-loop control, the simulation experimental research shows that the a half bridge IGBT series resonant inverter spot welding machine is high efficiency, good stability, PWM control precision, etc, make the inverter spot welding machine working performance was improved.
|
Published: 19 May 2015
|
|
|
|
Cite this article: |
Liu Xiaodong,Yang Yan,Li Fangyuan等. IGBT Series Resonant Inverter Research and Improvement of the Resistance Spot Welding Machine[J]. Electrical Engineering, 2015, 16(05): 39-43.
|
|
|
|
URL: |
http://dqjs.cesmedia.cn/EN/Y2015/V16/I05/39
|
[1] 郭秉楠. 可切换双网孔逆变电路结构的反常功率特性研究[D]. 天津: 南开大学, 2008. [2] 左小娟. 低 Q 值中频电源研究[D]. 青岛: 青岛大学, 2013. [3] 张泰峰, 郭秉楠, 等. IGBT半桥串联谐振高频感应焊接电源[J]. 南开大学学报(自然科学版),2009, 42(2). [4] 申磊, 杨艳, 等. 基于DSP低 Q 值感应加热电源的研究[J]. 青岛大学大学学报(工程技术版), 2013, 28(4). [5] 齐幸坤. IGBT半桥串联谐振逆变器的研究[D]. 保定:华北电力大学, 2012. [6] 陈怡. 串联谐振逆变电阻点焊机的研究及实现[D].天津: 天津大学, 2002. [7] 张勇. 点焊逆变电源软开关及模糊神经网络控制研究[D]. 西安: 西北工业大学, 2006. [8] Dawson F P, Jain P. A comparison of load commutated inverter systems for induction heating and melting applications[J]. IEEE Transactions on Power Electronics, 1991, 6(3): 430-441. [9] Golde E. Oscillator circuit thyristor converters for induction heating[J]. Proceedings of the IEEE, 1967, 55(8): 1449-1452. [10] 金东琦, 田云. 基于DSP的逆变焊接电源设计[J]. 电焊机, 2009, 40(10). [11] 邹焕青. 等效单电源自然环流型半桥逆变器的反常功率输出特性分析[D]. 天津: 天津大学, 2009. [12] 郭伟东. 基于DSP的串联谐振式中频电源的研究[D].西安: 西安科技大学, 2012. |
|
|
|