|
|
Research on the selection of copper busbar in low voltage switchgear |
Xu Deqin, Sheng Xiaoyan |
Ningbo Tianan (group) Co., Ltd, Ningbo, Zhejiang 315700 |
|
|
Abstract The determination of current-carrying capacity of copper busbar in the cabinet and the selection of busbar specifications are not only an important part of the design and manufacture of the low voltage switchgear cabinet , but also a significant guarantee for the safe operation of the equipment . However, there is no clear standard in China at present, because of the existence of lots of factors affecting the load flow and the specification selection of copper bus is relatively difficult and unconvincing. Through the qualitative and quantitative analysis of the conductor temperature and the ambient temperature in the cabinet, the conductor temperature is determined, and the conductor ambient temperature is preset to correct the general carrier discharge data in this paper. Then checking the calculation according to the standard recommendation method. In this way, the load capacity data of copper busbar which are suitable for low voltage switchgear in the using environment are obtained, meanwhile provides a new idea for the calculation of load flow of copper busbar of low voltage switchgear and the selection of busbar specifications.
|
Received: 12 May 2018
Published: 16 November 2018
|
|
|
|
[1] 王策, 张磊. 一起电容器起火事故分析及防范措施[J]. 电气技术, 2015, 16(2): 126-128. [2] 叶芳, 马崇, 张健, 等. 计及线路热惯性效应的模型预测控制安全经济调度模型[J]. 电工技术学报, 2018, 33(8): 1875-1883. [3] 马丽叶, 贾彬, 卢志刚, 等. 基于静态安全性和实时供电能力的输电网安全等级研究[J]. 电工技术学报, 2014, 29(6): 229-237. [4] 吕安强, 寇欣, 尹成群, 等. 三芯海底电缆中复合光纤与导体温度关系建模[J]. 电工技术学报, 2016, 31(9): 59-65. [5] DIN 43671—1975. 铜汇流排; 持续电流的计算[S] [6] GB/T7251.1—2013. 低压成套开关设备和控制设备第1部分: 总则[S] [7] GB/T7251.12—2013. 低压成套开关设备和控制设备第2部分: 成套电力开关和控制设备[S] [8] 轩吉涛, 张建奇, 崔赟杰, 等. 风冷技术对降低框架断路器温升的研究及应用[J]. 电气技术, 2014, 15(3): 108-110. [9] GB/T 24276—2017. 通过计算进行低压成套开关设备和控制设备温升验证的一种方法[S]. |
|
|
|