某型252kV自能式SF<sub>6</sub>断路器不同燃弧时间下的开断性能仿真分析

Abstract
Figure/Table
References
Related Citation (2)

Download: PDF (2420 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Based on the MHD theory, a simulation model for 252kV self-blast SF₆ circuit breaker is established in this paper using the real gas model and the dynamic mesh method. The gas flow field at different breaking currents and different arcing times are acquired respectively. The pressurization in the expansion chamber is compared on emphasis from the angles of contours and curves. Seven analysis points at the key area are chosen for observing the variation characteristics of gas pressure, temperature, velocity and Mach number. The calculation results under 40kA, 50kAand 63kA currents show that the pressurizations are affected little by the breaking currents at the same current conditions, the increments of gas pressure are close at the expansion chamber. The distributions of gas flow field and the pressurizations are more related to the arcing times. More rising of gas pressure can be obtained with the long arcing time. Furthermore, the differences of the temperature are bigger at the larger current than that at the small current. So, more improvements should be carried out according to the long arcing time period under large current interruption for meeting the market demand.

Key words： SF₆ circuit breaker arc plasma characteristics arcing time breaking simulation

Received: 19 August 2021

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GUO Jin
	JIANG Xu

Cite this article:

GUO Jin,JIANG Xu. Simulation analysis of breaking performance of a self-blast type 252kV SF₆ circuit breaker under different arcing times[J]. Electrical Engineering, 2022, 23(1): 29-34.

URL:

http://dqjs.cesmedia.cn/EN/Y2022/V23/I1/29

[1] CLAESSENS M, SCHOENEMANN T, STEFFENS A, et al.Physical aspects of a self-blast generator circuit breaker for current up to 200kA[C]//Proceedings of 15th International Conference on Gas Discharges, Toulouse, France, 2004: 9-12.
[2] ZHANG Jinling, YAN Jiudun, MURPHY A B, et al.Computational investigation of arc behavior in an auto-expansion circuit breaker contaminated by ablated nozzle vapor[J]. IEEE Transactions on Plasma Science, 2002, 30(2): 706-719.
[3] ZHANG Jinling, YAN Jiudun, FANG M T C. Investi- gation of the effects of pressure ratios on arc behavior in a supersonic nozzle[J]. IEEE Transactions on Plasma Science, 2000, 28(3): 1725-1734.
[4] YOSHIDA D, YANG D L, CHUNG Y H, et al.Evaluation of current interrupting capability of SF₆ gas circuit breakers[C]//Proceedings of 14th International Conference on Gas Discharges, Liverpool, America, 2002: 11-14.
[5] 严旭, 姜旭, 朱凯, 等. SF₆断路器灭弧室内电弧特性参数间的相互关系研究[J]. 电气技术, 2021, 22(5): 6-9.
[6] 仲林琳, 王小华, 荣命哲. 高压开关SF₆-Cu电弧净辐射系数计算[J]. 电工技术学报, 2018, 33(23): 5600-5606.
[7] 刘晓明, 韩颖, 王尔智, 等. 基于多物理场耦合的高压SF₆断路器混沌电弧模型[J]. 电工技术学报, 2013, 28(1): 165-172.
[8] 姜旭. 高压SF₆断路器开断过程中的气流场特性仿真及实验研究[D]. 西安: 西安交通大学, 2014.
[9] 牟京卫, 郭瑾, 邓湘鄂. SF₆断路器的热开断性能的数值预测[J]. 高电压技术, 2013, 39(4): 822-826.
[10] 牟京卫, 郭瑾, 李兴文, 等. SF₆断路器开断能力数值预测方法研究综述[J]. 高压电器, 2012, 48(3): 104-107.
[11] 林莘, 李鑫涛, 王飞鸣, 等. 触头烧损对SF₆断路器介质恢复特性的影响[J]. 高电压技术, 2014, 40(10): 3125-3134.
[12] 李刚, 高享想, 刘浩军, 等. 高压交流断路器大容量短路开断与关合试验技术[J]. 高压电器, 2018, 54(2): 68-75.
[13] 孙梅, 王培人, 刘朴, 等. 高压断路器三相全电压关合合成试验回路研究[J]. 高压电器, 2016, 52(4): 175-179.
[14] 张静波. 提高SF₆断路器低温工况下开断电流的研究[J]. 中国设备工程, 2018(24): 184-185.
[15] 钟建英, 林莘, 何荣涛. 自能式SF₆断路器熄弧性能的并行计算仿真[J]. 中国电机工程学报, 2006, 26(20): 154-159.
[16] 刘砚菊, 曹云东, 刘晓明, 等. 旋气吹弧式SF₆断路器及其三维气流场特性的仿真响[J]. 高压电器, 2008, 44(2): 100-103.
[17] ZHAO Hu, LI Zingwen, JIA Shenli, et al.Dielectric breakdown properties of SF₆-N₂ mixtures at 0.01~ 1.6MPa and 300~3000K[J]. Journal of Applied Physics, 2013, 113(14): 1433-1441.
[18] JIANG Xu, LI Xingwen, ZHAO Hu, et al.Analysis of the dielectric breakdown characteristics for a 252kV gas circuit breaker[J]. IEEE Transactions on Power Delivery, 2013, 28(3): 1592-1599.
[19] 林莘, 钟建英. 自能式断路器灭弧室气流场计算的一种新思路[J]. 中国电机工程学报, 2003, 23(10): 164-168.