|
|
|
| Noise Mechanism Analysis and Suppression for High-speed Digital PCB Radiated Electromagnetic Interference |
| Sun Hongyan1, Zhao Yang2, Zhang Yang2 |
1. Nanjing Normal University, Taizhou College, Taizhou, Jiangsu 225300;
2. School of Electrical and Automation Engineering, Nanjing Normal University, Nanjing 210042 |
|
|
|
|
Abstract For the radiated EMI technology of high-speed digital PCB, the modeling and features on the interference noise are analyzed in this paper. On the basis of radiated EMI mechanism analysis on the electronic equipments, the crystal interference model, power chip model and data cable interference model are established. In addition, the radiation problems of two equipments are taken as experiment subjects, and the problems are diagnosed and suppressed by the interference model proposed in this paper. After efficient suppression methods, the two equipments can pass the limit requirements of GB 9254.
|
|
Published: 09 December 2015
|
|
|
|
| Cite this article: |
|
Sun Hongyan,Zhao Yang,Zhang Yang. Noise Mechanism Analysis and Suppression for High-speed Digital PCB Radiated Electromagnetic Interference[J]. Electrical Engineering, 2015, 16(12): 61-66.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2015/V16/I12/61
|
[1] Sarikhani A, Barzegaran M, Mohammed OA. Optimum equivalent models of Multi-Source systems for the study of electromagnetic signatures and radiated emissions from electric drives[J]. IEEE Transactions on Magnetics, 2012, 48(2): 1011-1014.
[2] 张卫东, 邢悦, 崔翔. 电力线通信网络电磁辐射近场测量系统[J]. 中国电机工程学报, 2010, 30(12): 117-121.
[3] 方哲, 郁滨, 岳云天. 串行传输线同步信号辐射发射模型研究[J]. 仪器仪表学报, 2013, 34(10): 2373-2380.
[4] Tong Xin, Thomas DW, Nothofer A, et al. Modeling electromagnetic emissions from printed circuit boards in closed environments using equivalent dipoles[J]. IEEE Transactions on Electromagnetic Compatibility, 2010, 52(2): 462-470.
[5] Vahrenholt V, Brüns HD, Singer H. Fast EMC analysis of systems consisting of PCBs and metallic antenna structures by a hybridization of PEEC and MoM[J]. IEEE Transactions on Electromagnetic Compatibility, 2010, 52(4): 962-973.
[6] 赵阳, 颜伟, 赵波, 等. 电路辐射干扰机理诊断与特性估计[J]. 电工技术学报, 2010, 25(10): 6-13.
[7] 赵阳, 戎融, 张宇环, 等. 提高GTEM小室测量EMI噪声精度的研究[J]. 中国电机工程学报, 2012, 32(27): 169-176, 198.
[8] 赵阳, 颜伟, 邱晓晖. 电力载波通讯中辐射噪声的分析与抑制[J]. 中国矿业大学学报, 2011, 40(1): 152-156.
[9] Yan W, Zhao Y, Luo Yc, et al. Study on multifunction GTEM cell for radiated EMI measurement and analysis[C]//Electric Power and Energy Conference, 2010: 1-4.
[10] Zhao Y, Liu Y, Li S J, et al. The radiated EMI noise modeling and features analysis on the basis of Smart Grid Equipments[C].Electromagnetic Compatibility (EMC Europe), 2014 International Symposium on. IEEE, 2014: 1199-1202. |
|
|
|
2015, Vol. 16 
