|
|
Energy Saving Fault Current Limiter Based on Fast Switch |
Wu Gang1, Zhang Guoyan1, Zhang Jianmin2, Yang Wantao2 |
1. Chifeng Power Supply Corporation, Chifeng, Inner Mongdia 024000; 2. Beijing Sifang-Huaneng Power Network Control System Co., Ltd, Beijing 100085 |
|
|
Abstract The topology structure of the fast switching mode current limiter is proposed, and its current limiting principle and energy - mode are introduced, and the current limiting effect is analyzed by Matlab software. The fault current limiter, topology has the advantages of simple structure, under the normal state by fast switching circuit, no electric energy loss, using the latest fast switching technology, relative to the presently limited flow device in terms of switch closing action time faster.
|
Published: 13 January 2016
|
|
|
|
[1] 国熊炜, 卢宏振. 广东电力系统短路电流水平及限制措施研究[J]. 贵州工业大学学报(自然科学版), 2002, 31(5): 32-35. [2] 唐宗华. 面向高压电网的经济型故障限流器的关键技术研究[D]. 济南: 山东大学, 2013. [3] Kojovic L, Assler S. Plication of current limiting fuses in distribution systems for improved power quality and protection[J]. IEEE Trans on Power Delivery, 1997, 12(2): 791-800. [4] 李昊. 开关特性短路电流限制器暂态特性分析[D]. 济南: 山东大学, 2013. [5] Yamamguchi M, Fukui S. Performance of DC reactor type fault current limiter using high temperature supper conducting coil[J]. IEEE Transactions on Applied Superconductivity, 1999, 9(2): 941-945. [6] Requirements for a Distribution Fault Current Limiter [J].IEEE Transactions on Power Delivery, 1992, 7(2): 507-513. [7] 高凯平. 限制短路电流的方法[J]. 电力安全技术, 2000, 2(3): 54. [8] Ueda T, Morita M, Arita H, et al. Solid-state current limiter for power distribution system[J]. IEEE Trans on Power Delivery, 1993, 8(4): 1796-1801. [9] CIGRE Working GroupA3.10 Reports.Fault Current Limiters in Electrical Medium and High Voltage Systems[C]. CIGRE Technical Brochure, 2003. |
|
|
|