|
|
Defect Analysis and Treatment of SF6 Gas Leakage in a Gas-insulated Switchgear Bellows |
Xu Jiakai, Wang Jian, Liu Yongli, Wang Sicheng |
State Grid Weifang Power Supply Company, Weifang, Shangdong 261000 |
|
|
Abstract SF6 gas leakage in a 220kV gas-insulated switchgear bellows caused by the deficient handing of the riveting process is described. The terrible riveting process results in multiple site gas leakage around the bellows. This paper analyzes the live detection and power-off maintenance process of the defect. Comprehensive analysis of the fault cause is taken based on the operating experience and field investigation. Finally, a series of prevention measures are proposed as a guide and reference for similar defect processing.
|
Published: 22 March 2016
|
|
|
|
Cite this article: |
Xu Jiakai,Wang Jian,Liu Yongli等. Defect Analysis and Treatment of SF6 Gas Leakage in a Gas-insulated Switchgear Bellows[J]. Electrical Engineering, 2016, 17(3): 116-119.
|
|
|
|
URL: |
http://dqjs.cesmedia.cn/EN/Y2016/V17/I3/116
|
[1] 薛雷. 六氟化硫气体的计算应用及实例分析[J]. 电工电气, 2011, 7(7): 35-38. [2] 额定电压72, GB 7674 2008. 5kV及以上气体绝缘金属封闭开关设备[S]. [3] GB/T 12777 2008. 金属波纹管膨胀节通用技术条件[S]. [4] JB/T 10617 2006. 高压组合电器用金属波纹管补偿器[S]. [5] GB/T 30092 2013. 高压组合电器用金属波纹管补偿器[S]. [6] 夏平, 唐应时, 吴安如. 铆钉铆接装配应力的分析和计算[J]. 机械, 2003, 30(4): 44-45, 48. [7] GB 50147 2010. 电气装置安装工程 高压电器施工及验收规范[S]. [8] GB 50150 2006. 电气装置安装工程 电气设备交接试验标准[S]. [9] Q/GDW 1799.1 2013. 国家电网公司电力安全工作规程[S]. [10] 徐贞华, 田伟莉. 220kV六氟化硫组合电器的运行与试验[J]. 有色冶金节能, 2003, 20(5): 27-29. [11] 郭建, 张元. 六氟化硫电气设备检漏分析[J]. 山西电力, 2009(4): 12-13. [12] 李海波, 万荣兴, 方勇. 金属波纹管补偿器在高压组合电器中的应用与故障分析[J]. 高压电器, 2014(11): 145-150, 154. |
|
|
|