|
|
|
| Development of Power Panel with Multifunctional Automate Traversing Gear and Digital Readout |
| Pan Chao, Han Guang, Tong Xin, Guang Shaoqing, Yang Zhigang |
| Heifei Power Supply Company, Anhui Provincial Electric Power Company, Hefei 230022 |
|
|
|
|
Abstract Power panel is one of the most common tools in electrical equipment maintenance. There are serious problems of the traditional power panel, such as the low working efficiency, bad match and unable to monitor voltage or current of source, so it is imperative that a kind of new power panel. To the questions, the new power panel is designed with automate traversing gear, many plugs and digital readout of voltage and current. According to probation statistics, it can save two-thirds of the time, eliminate the security risks, guarantee the accuracy of the data, has common applicability and value to popularize.
|
|
Published: 20 April 2016
|
|
|
|
| Cite this article: |
|
Pan Chao,Han Guang,Tong Xin等. Development of Power Panel with Multifunctional Automate Traversing Gear and Digital Readout[J]. Electrical Engineering, 2016, 17(4): 105-109.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2016/V17/I4/105
|
[1] 江宇明, 吴瑞文, 朱亮, 等. 电源盘存在的问题及多功能便携式试验电源箱的研发[J]. 电工技术, 2013, 11(11): 19, 42.
[2] 张策. 机械原理与机械设计(上册)[M]. 北京: 机械工业出版社, 2011.
[3] 高志. 机械原理[M]. 上海: 华东理工大学出版社, 2011.
[4] 黄清海. 凸轮—连杆组合机构的分析与综合[D]. 福州: 福州大学, 2006.
[5] 孙岗存, 袁丽. 双齿条驱动交换台站的设计[J]. 制造技术与机床, 2011, 12(12): 207-209.
[6] 杨楠. 高速往复丝杠副设计中的问题及解决方法[J]. 纺织机械, 2007, 5(5): 45-47.
[7] 李川渠, 张俊俊, 王基生. 往复丝杠沟槽正弦过渡曲线的设计与仿真[J]. 机械设计与制造, 2015, 2(2): 181-184.
[8] 葛正浩, 蔡小霞, 杨芙莲, 等. 凸轮连杆机构的精度分析与综合[J]. 中国制造业信息化, 2003, 32(2): 112-113.
[9] 闻邦椿. 机械设计手册[M]. 北京: 机械工业出版社, 2010.
[10] 张建明. 精密机械传动链动态传动精度检测分析系统的研制[D]. 南京: 南京理工大学, 2007.
[11] 阎治安, 崔新艺, 苏少平. 电机学[M]. 西安: 西安交通大学出版社, 2008. |
|
|
|
2016, Vol. 17 
