|
|
|
| Design of Low-Inductance Laminated Busbar based on Ansys |
| Chen Jing |
| School of Physics and Electronic Electrical Engineering, Huaiyin Normal University, Huaian, Jiangsu 223300 |
|
|
|
|
Abstract To the harm of power switch shut-off over-voltage and EMI, this paper introduces the advantages and mathematical model of laminated busbar applied in power converter, which can reduce circuit stray inductance. Then, based on electromagnetic field theory, design principles of a non-inductance busbar structure were proposed by minimizing loop area, and H-bridge inverter laminated bus structure was designed. Finally, the results of Ansys finite element simulation show that the rationality of design method.
|
|
Published: 22 June 2016
|
|
|
|
[1] 白保东, 陈晨, 张士军, 等. 隔爆一体式变频电机的层叠母线设计[J]. 沈阳工业大学学报, 2010, 32(1): 1-5, 10.
[2] 易荣, 赵争鸣, 袁立强. 高压大容量变换器中母排的优化设计[J]. 电工技术学报, 2008, 23(8): 94-100.
[3] 汪鋆. 基于IGBT的750kVA三相二极管箝位型三电平通用变流模块设计[D]. 杭州: 浙江大学, 2010.
[4] Caponet M C, Profumo F. Tenconi. Low stray inductance bus bar design and construction for good EMC performance in power electronic circuit[J]. IEEE Transactions on Power Electronics, 2002, 17(2): 225- 231.
[5] Zhiqiang Wang, Guozhu Chen. Study on planar busbar regarding stray inductance minimization and oscill- ation supperesion for high power converter[J]. IEEE Transactions on Power Electronics, 2007, 10: 37-42. |
|
|
|
2016, Vol. 17 
