|
|
|
| The Calculation of the Leakage Inductance of the Common Mode Choke based on Finite Element Analysis |
| Bai Xusheng, Dong Jiqing |
| College of Electrical Engineering and Automation of Fuzhou University, Fuzhou 350116 |
|
|
|
|
Abstract Common Mode Choke is an important magnetic component of EMI filter. leakage inductance of CM choke can be used as differential mode inductors to attenuate differential mode noise. when leakage inductance is small, it may not meet the requirements of differential-mode noise attenuation, however when it is big, it is easy to cause core saturation, so leakage inductance of the common mode choke is a parameter needed to be optimized and predicted. Based on finite element analysis, some 3-D common mode chokes of different sizes, different angles between two windings are simulated. Based on the relationship between simulated inductances and CM choke sizes, angles between two windings,we can derive mathematical model of the leakage inductance of the common mode choke. The sample measurements verify the correctness of the mathematical model.
|
|
Published: 20 January 2017
|
|
|
|
| Cite this article: |
|
Bai Xusheng,Dong Jiqing. The Calculation of the Leakage Inductance of the Common Mode Choke based on Finite Element Analysis[J]. Electrical Engineering, 2017, 18(1): 18-22.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2017/V18/I1/18
|
[1] 陈恒林. EMI滤波器高频建模——寄生效应研究[D]. 杭州: 浙江大学, 2007.
[2] Nave MJ. On modeling the common mode inductor [C]//IEEE 1991 International Symposium on Electromagnetic Compatibility, 1991: 452-457.
[3] Heldwein M L, Dalessandro L, Kolar J W. The Three-Phase Common-Mode inductor: modeling and design issues[J]. IEEE Transactions on Industrial Electronics, 2011, 58(8): 3264-3274.
[4] West R. Common mode inductor material selection [C]//and Electrical Manufacturing & Coil Winding Conference, 1995: 489-495.
[5] De Leon F, Purushothaman S, Qaseer L. Leakage inductance design of toroidal transformers by sector winding[J]. IEEE Transactions on Power Electronics, 2014, 29(1): 473-480. |
|
|
|
2017, Vol. 18 
