|
|
Integrated Control Method of Voltage and Reactive Power for STATCOM Applied in Distribution Network |
Liu Guohui |
Rongxin Power Electronic Co., Ltd, Anshan, Liaoning 114000 |
|
|
Abstract This paper firstly introduced the basic principle of STATCOM, then supplied the overview of this project application. In order to satisfy the distribution network requirements to reactive power compensation equipment, integrated control method of voltage and reactive power, including corresponding parameters adjusting method was proposed, and its validity was verified by PSIM simulation model. STATCOM equipment with this control method was successfully applied in Guangdong power grid project. The good application effect proved that this control method could make power supplying more reliable and more stable.
|
Published: 24 February 2017
|
|
|
|
Cite this article: |
Liu Guohui. Integrated Control Method of Voltage and Reactive Power for STATCOM Applied in Distribution Network[J]. Electrical Engineering, 2017, 18(2): 70-73.
|
|
|
|
URL: |
http://dqjs.cesmedia.cn/EN/Y2017/V18/I2/70
|
[1] 粟时平, 刘桂英. 静止无功功率补偿技术[M]. 北京:中国电力出版社, 2006. [2] 王兆安, 杨君, 刘进军, 等. 谐波抑制和无功功率补偿[M].2版. 北京: 机械工业出版社, 2006. [3] 燕福龙. 电力系统电压和无功功率自动控制[M]. 北京: 中国水利水电出版社, 2013. [4] 王兆安, 李民, 卓放, 等. 三相电路瞬时无功功率理论的研究[J]. 电工技术学报, 1992(3): 45-49. [5] 龚娟. 级联多电平STATCOM控制策略研究[D]. 天津: 天津理工大学, 2008. |
|
|
|