|
|
Formulation and realization of communication protocol of CAN bus in V2G charging and discharging station system |
Chen Dong1, Hao Pan2, Yu Bo1 |
1. State Grid Electric Power Research Institute, Nanjing 210000; 2. College of Electrical Engineering, Southeast University, Nanjing 210000 |
|
|
Abstract With the rapid development of smart grid, Vehicle to Grid (V2G) technology is highly regarded. Vehicle could charge and discharge by the Charging and Discharging Station System. Communication protocol is available between vehicle and charging/discharging station to realize real-time data interaction. Based on CAN (Control Area Network) 2.0B, the application layer of CAN bus is designed to apply into Chinese vehicle. Through experimental test, the proposed communication protocol can guarantee the reliable interaction of information during charging and discharging of electric vehicles.
|
Received: 03 November 2017
Published: 21 May 2018
|
|
|
|
Cite this article: |
Chen Dong,Hao Pan,Yu Bo. Formulation and realization of communication protocol of CAN bus in V2G charging and discharging station system[J]. Electrical Engineering, 2018, 19(5): 83-87.
|
|
|
|
URL: |
http://dqjs.cesmedia.cn/EN/Y2018/V19/I5/83
|
[1] Kempton W, Tomić J.Vehicle-to-grid power imple- mentation: From stabilizing the grid to supporting large-scale renewable energy[J]. Journal of Power Sources, 2005, 144(1): 280-294. [2] 肖湘宁, 陈征, 刘念. 可再生能源与电动汽车充放电设施在微电网中的集成模式与关键问题[J]. 电工技术学报, 2013, 28(2): 1-14. [3] 吴诗宇, 史瑞祥. 非车载充电机与电池管理系统通信协议监测系统的研究[J]. 客车技术与研究, 2015(4): 60-62. [4] GB/T 20234.1—2015. 电动汽车传导充电用连接装置第1部分: 通用要求[S]. [5] GB/T 18487.1—2015. 电动汽车传导充电系统第1部分: 通用要求[S]. [6] GB/T 27930—2015. 电动汽车非车载传导式充电机与电池管理系统之间的通信协议[S]. [7] 裴晓泽. 大功率锂离子蓄电池充放电系统的研究[D]. 北京: 北京交通大学, 2008. [8] 王大为, 徐洋波, 臧云峰, 等. 具有谐波抑制功能的充放电机的研究[J]. 电气技术, 2014, 15(12): 45-47, 51. [9] 邓忠华, 陈秀峰. CAN总线在充放电机中的应用[J]. 自动化技术与应用, 2006, 25(10): 74-76, 83. [10] 胥清华, 李强. CAN总线发展与其他总线的比较[J]. 电气技术, 2011, 12(7): 46-49. [11] 崔保艳, 许建中. 双向充电桩的关键技术分析[J]. 电气技术, 2015, 16(10): 145-146. |
|
|
|