基于IEC 61968/70标准的风电及信息交互建模

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (25394 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract With the increasing scale of distributed wind power generation into the net, the power sector needs to carry on the effective monitoring and control. In order to achieve the exchange among the wind power generation, power grid, and the data sharing, a standard and open information model's establishment is necessary. Based on IEC 61968/70, a distributed energy CIM extension method and wind power's information interaction CIMs have been established to meet distribution, operation demands. The models realize the distribution network of distributed wind power remote communication, status information, fault information's effective management, apply to the design of distribution network management system, and provide a unified interface for development of advanced application.

Key words： common information model wind power information interaction energy management system

Received: 06 June 2018 Published: 31 August 2018

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yang Ming
	Li Xinran
	Lv Yunfeng
	Zhang Qing

Cite this article:

Yang Ming,Li Xinran,Lv Yunfeng等. IEC 61968/70 standard based modeling of wind power and its information interaction[J]. Electrical Engineering, 2018, 19(8): 82-89.

URL:

http://dqjs.cesmedia.cn/EN/Y2018/V19/I8/82

[1] Moseley J D, Mago N V, Sarma N, et al.Extending CIM standards to support exchange of ratings on dynamically rated equipment[J]. IEEE Transactions on Power Systems, 2016, 31(1): 296-303.
[2] E. Haq, D. Haller, E. Rodriguez.Use of CIM standard in power system modeling & enterprise wide messaging at California ISO[J]. Proc. 2010 IEEE Power and Energy Soc. General Meeting, 2010: 1-6.
[3] "IEC 61968", Application integration at electric utilities—system interfaces for distribution management—Part 11: Common Information Model (CIM).
[4] IEC 61970: “Energy management system application program interface (EMS-API)-Part 301: Common Information Model (CIM) Base”, IEC, 2009.
[5] D. Bytschkow, M. Zellner, M. Duchon.Combining SCADA, CIM, GridLab-D and AKKA for smart grid co-simulation[J]. Innovative Smart Grid Technologies Conference (ISGT), 2015 IEEE Power & Energy Society, Washington, DC, 2015: 1-5.
[6] 李为, 周琰, 成永强, 等. 基于CIM扩展的输变电在线监测系统模型[J]. 电气技术, 2017, 18(1): 77-82.
[7] 张磊, 史奎山, 陈国恩, 等. 基于CIM的调度自动化运行监测可视化平台[J]. 电气技术, 2016, 17(4): 130-132, 135.
[8] 陈卫建, 蒋正威, 黄斌, 等. 基于IEC标准的常规变电站的动态建模方法及应用[J]. 电气技术, 2014, 15(3): 23-27.
[9] 丁明, 张征凯, 毕锐. 面向分布式发电系统的CIM扩展[J]. 电力系统自动化, 2008, 32(20): 83-87, 96.
[10] 郑建辉, 孟昭勇, 林馨. 基于IEC 61970/61968的发电厂资源CIM建模[J]. 电力自动化设备, 2010, 30(1): 106-109.
[11] 张启雁, 王西超, 高圣源, 等. 基于CIM与XML技术的变电站监控信息数据研究与解析[J]. 电力系统及其自动化学报, 2015, 27(S1): 78-82.
[12] 黄小庆, 白纯, 曹一家, 等. 基于公共信息模型的输电设备全景信息扩展建模[J]. 高电压技术, 2015, 41(12): 3929-3936.
[13] 吴文传, 刘鹏飞, 张屹, 等. 有源配电网公共信息模型扩展及其标准算例系统设计[J]. 电网技术, 2012, 36(9): 155-161.
[14] 刘晓放. 继电保护静态特性监视及隐藏故障诊断方法研究[D]. 重庆: 重庆大学, 2009.
[15] 张晴, 李欣然, 杨明, 等. 净效益最大的平抑风电功率波动的混合储能容量配置方法[J]. 电工技术学报, 2016, 31(14): 40-48.
[16] 梁竹靓, 韩兵, 彭永. IEC 60870-5-104规约在分布式电力监控系统中的应用[J]. 电力系统保护与控制, 2011, 39(4): 124-127.
[17] 杨良, 王议锋, 孟准. 小型并网风力发电系统控制策略[J]. 电工技术学报, 2017, 32(10): 252-263.