|
|
|
| The brief analysis of the typical failure cases of ABB LTB245E1 series breaker |
| Wang Xiao1, Dong Deyong1, Zhou Xiao1, Chuai Zhenguo1, Wang Yulin2 |
1. Jiangsu Electric Power Company Maintenance Branch, Nanjing 210000;
2. Jiangsu Electric Power Company Taizhou Power Supply Company, Taizhou, Jiangsu 225300 |
|
|
|
|
Abstract The ABB LTB245 series breaker is one of the common switching equipment in modern substation. The spring self-energy SF6 extinguishing device is adopted. The basic structure and operation principle of LTB245E1 circuit breaker are introduced. This paper analyzes a case of the failure of the switch closing due to the failure of the closed turning arm, but unsuccess after operation several times. Because of the BW wheel (energy storage limit roller) fixed plate has deviation and transformation in the energy storage process, the operation mechanism has been stored over energy. So the working condition of coil spring is affected and the Energy storage motor can not complete energy storage. The two typical cases where the breaker cannot be closed due to mechanical failure in the operating mechanism box. The analysis of the fault causes can provide reference for the transformer. At the same time for the related manufacturers design personnel equipment upgrade to provide the basis.
|
|
Received: 25 January 2018
Published: 23 October 2018
|
|
|
|
| Cite this article: |
|
Wang Xiao,Dong Deyong,Zhou Xiao等. The brief analysis of the typical failure cases of ABB LTB245E1 series breaker[J]. Electrical Engineering, 2018, 19(9): 104-106.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2018/V19/I9/104
|
[1] 电力行业职业技能鉴定指导中心. 职业技能鉴定指导书(变电检修)[M]. 北京: 中国电力出版社, 2009.
[2] 陈国恩, 李伟, 张仲孝. 电网故障诊断方法及其系统架构的研究[J]. 电气技术, 2018, 19(1): 64-67.
[3] 刘煌煌. SF6断路器储能接点故障引起合闸线圈烧毁的分析与改进[J]. 电气技术, 2016, 17(10): 146-148.
[4] 张凯, 杨佩佩, 杨军亭, 等. 一起断路器机构故障引起的事故分析[J]. 电气技术, 2016, 17(10): 142-145.
[5] 中华人民共和国国家标准. GB1985—2004. 高压交流隔离开关和接地开关[Z].
[6] 国家电网公司企业标准. Q/GDW1799.1—2013. 国家电网公司电力安全工作规程(变电部分)[S].
[7] 杭荣付. 浅谈变电所隔离开关控制和操作[J]. 科学与财富, 2010(1): 80-82.
[8] 戴诵坚. 论高压隔离开关的技术要求及常见故障的处理[J]. 科学之友, 2010(30): 49-50.
[9] 韦斌. 500kV隔离开关常见的控制回路故障及分析[J]. 电力电气, 2010, 29(17): 64-66.
[10] LTB 72.5-245E1.单相或三相操作产品手册[Z]. |
|
|
|
2018, Vol. 19 
