|
|
|
| Tolerance simulation analysis of the contact terminate force for molded case circuit breaker |
| Yuan Yifeng |
| Delixi Electric Co., Ltd, Shanghai Branch, Shanghai 201812 |
|
|
|
|
Abstract Taking the contact terminate force of molded case circuit breaker as the optimization objective, based on the computer aided tolerance analysis, the stress analysis, dimension sensitivity analysis and weight analysis are introduced to optimize the relative dimension tolerance and the stiffness coefficient of the contact terminate force. The analysis results show that, compared to the previous theory only nominal force value, after considering the stress tolerance analysis, calculation of force not only has theoretical value, but also the tolerance range, and according to the current process, put forward the improvement scheme to optimize the contact terminate force.
|
|
Received: 19 March 2018
Published: 23 October 2018
|
|
|
|
| Cite this article: |
|
Yuan Yifeng. Tolerance simulation analysis of the contact terminate force for molded case circuit breaker[J]. Electrical Engineering, 2018, 19(10): 28-35.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2018/V19/I10/28
|
[1] 石振东. 尺寸链理论与应用[M]. 哈尔滨: 黑龙江科学技术出版社, 1993.
[2] 张荣瑞. 尺寸链原理及其应用[M]. 北京: 机械工业出版社, 1986.
[3] 袁亦峰. 塑壳断路器机构静态与动态的稳定性设计[J]. 电气技术, 2013, 14(8): 85-88.
[4] 葛永斌, 杨仕富. 功能设计方法及Tolerance Manager软件在550kV弹簧操作机构设计中的应用[C]//2013年中国制造业产品创新数字化国际峰会论文集, 2013: 13-24
[5] 秦家爱, 张顺法. 公差分析软件在电气产品设计中的运用[J]. 上海电器技术, 2009(1): 55-59.
[6] 张军化, 徐泽亮, 鲁骞. 计算机辅助公差分析在微型断路器设计中的应用[J]. 低压电器, 2011(10): 53-57.
[7] 赵斐, 汪海贵, 程代玲, 等. 基于TM软件高压真空断路器尺寸链的分析[J]. 新技术新工艺, 2014(3): 57-60.
[8] GB/T5847—2004. 尺寸链计算方法[S]
[9] 王家海, 周纲. CETOL平台下微型断路器尺寸链及公差研究[J]. 自动化仪表, 2011, 32(9): 14-17.
[10] 孟飙, 王勃. 工程尺寸驱动原理的完善及其在公差分析中的应用[J]. 航空学报, 2014, 35(6): 1740-1749.
[11] 陈佳成. 电器产品机构零部件设计的公差选择[J]. 电气技术, 2014, 15(11): 59-61. |
|
|
|
2018, Vol. 19 
