|
|
|
| Value engineering application in surge protection device optimization design |
| Luo Jiajun1, Zhou Yanchuan2 |
1. Shenzhen DOWIN Lightning Technologies Co., Ltd, Shenzhen, Guangdong 518132;
2. Tianjin Meteorological Bureau, Tianjin 300074 |
|
|
|
|
Abstract The purpose of Value Engineering is that using the lowest life cycle cost, realize the necessary function in a reliable way, it is an activity to mainly study the function of the product or service. Functional analysis is the core of value engineering. In SPD product development, using the method of value analysis to analyze and evaluate function based on combination SPD (MOV+R+TVS), to re-recognized the main function of every components, analyzes the practical cooperation between the components , so as to optimize design and reduce costs, improve the value of the product .In the process of the whole function analysis, there will be a new discovery.
|
|
Received: 14 May 2019
Published: 19 December 2019
|
|
|
|
| Cite this article: |
|
Luo Jiajun,Zhou Yanchuan. Value engineering application in surge protection device optimization design[J]. Electrical Engineering, 2019, 20(12): 88-90.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2019/V20/I12/88
|
[1] 中华人民共和国住房和城乡建设部. GB 50057—2010. 建筑物防雷设计规范[S].
[2] 罗伯特B.斯图尔特, 邱菀华. 价值工程方法基础[M]. 北京: 机械工业出版社, 2007.
[3] 杨建昊, 金立顺. 广义价值工程[M]. 北京: 国防工业出版社, 2009.
[4] 蔡剑碧, 罗佳俊, 于东海, 等. 低压防雷器件响应特性及其配合研究[C]//智能防雷网赢未来——2016中国雷电防护高峰论坛论文集, 2016: 96-104. |
|
|
|
2019, Vol. 20 
