|
|
Development of trigger source based on trigger vacuum tube in electric spark source |
Jiang Huihuang, Fu Zhihong |
School of Electrical Engineering, Chongqing University, Chongqing 400044 |
|
|
Abstract In the development process of the spark source, whether the main circuit switch can stably trigger the conduction is the most critical part of the whole system. A vacuum trigger tube is used as the source discharge switch. Based on the vacuum trigger tube, a pulse trigger source capable of stably triggering the vacuum trigger tube conduction is developed. Two trigger loops: direct trigger and indirect trigger are designed, and the trigger tube conduction experiment verification and waveform acquisition are performed. The results show that the trigger energy of the trigger source has a great influence on the conduction of the trigger tube. The developed direct trigger source can make the vacuum trigger tube stably conduct. The successful development of this trigger source will also greatly promote the smooth development of follow-up research.
|
Received: 05 November 2019
Published: 16 April 2020
|
|
|
|
Cite this article: |
Jiang Huihuang,Fu Zhihong. Development of trigger source based on trigger vacuum tube in electric spark source[J]. Electrical Engineering, 2020, 21(4): 1-4.
|
|
|
|
URL: |
http://dqjs.cesmedia.cn/EN/Y2020/V21/I4/1
|
[1] 周正阳. 场击穿型真空触发开关的相关理论与实验研究[D]. 大连: 大连理工大学, 2010. [2] 廖敏夫, 邹积岩, 段雄英, 等. 高性能真空触发开关技术的研究综述[J]. 高压电器, 2006, 42(1): 51-54. [3] 田微, 盖斐, 陈仕修, 等. 触发电流对真空触发开关导通特性影响的实验[J]. 电工技术学报, 2017, 32(20): 28-33. [4] 毛新果, 戴玲, 张弛, 等. 带陡化间隙的触发真空开关触发源研制[J]. 强激光与粒子束, 2016, 28(1): 134-140. [5] 周正阳, 廖敏夫, 翟云飞. 场击穿型真空触发开关的触发源性能研究[J]. 高压电器, 2011, 47(2): 17-21. [6] Shenoy A U, Shenoy U V.Continuous targeting and network design for zero wastewater discharge in water system integration[J]. Journal of Cleaner Production, 2015: 627-641. [7] 张亚舟, 李贞晓, 程年恺, 等. 一种真空触发开关脉冲电源系统研究[J]. 兵工学报, 2017, 38(8): 1469-1475. [8] 范兴明, 张鑫, 杨家志, 等. 交直流电压条件下TVS触发特性研究[J]. 真空科学与技术学报, 2012, 32(6): 477-482. [9] 李玺钦, 赵娟, 吴红光, 等. 一种100kV Mini-Marx发生器触发源的设计[J]. 强激光与粒子束, 2014, 26(8): 263-266. |
|
|
|