|
|
|
| Simulation research on insulation frame of high voltage parallel collective capacitor based on Abaqus |
| Zhang Lei, Quan Jianghua, Zhang Wei, Wen Zhengqi, Dong Shiyu |
| Wuhan Nari Limited Liability Company of State Grid Power Research Institute, Wuhan 430074 |
|
|
|
|
Abstract In this paper, the finite element simulation analysis of the insulation frame under the above conditions is carried out by establishing an analysis model of the high-voltage parallel assembled capacitor insulation frame under various load conditions in hoisting and transportation based on Abaqus. Finally, according to the results of finite element simulation, the maximum stress values of the components of the insulation frame under various working conditions are lower than the material strength limit, which meets the design requirements of the collective capacitor. According to the above simulation model, the physical frame of the insulation frame is designed. Through the simple physical lifting test and other type tests, the strength of the insulation frame is verified to meet the requirements of the product. At the same time, the credibility of the simulation results is verified. The design and verification methods can be used for the development of subsequent similar products.
|
|
Received: 04 September 2019
|
|
|
|
| Cite this article: |
|
Zhang Lei,Quan Jianghua,Zhang Wei等. Simulation research on insulation frame of high voltage parallel collective capacitor based on Abaqus[J]. Electrical Engineering, 2020, 21(5): 10-14.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2020/V21/I5/10
|
[1] 宋森. 电力行业电力电容器标准化技术委员会. 并联电容器装置技术及应用[M]. 北京: 中国电力出版社, 2011.
[2] 张堃, 田珂. 对称结构中非对称载荷的对称分解方法[J]. 机械工程师, 2009(6): 81-82.
[3] 彭春雷, 吴雪飞, 马本学. 基于ANSYS中的对称分析及其应用[J]. 机械设计与制造, 2007, 18(12): 68-69.
[4] 何峋. 一种通用变流器柜的强度分析和改进设计[J]. 电气技术, 2018, 19(1): 80-84.
[5] 陈兵, 张雷, 尹忠俊, 等. 基于ANSYS的大型煤粉筛筛箱动力学分析[J]. 矿山机械, 2011, 39(11): 72-74.
[6] 包红旗. 大型车载移动变电站[M]. 北京: 中国水利水电出版社, 2013. |
|
|
|
2020, Vol. 21 
