|
|
|
| Fault locating method of cables considering the metal sheath and armour structure |
| Song Qin, Wang Yuanyuan |
| School of Electrical & Information Engineering, Changsha University of Science & Technology, Changsha 410114 |
|
|
|
|
Abstract To improve the accuracy and reliability of power cable fault location method, a cable fault location method considering metal sheath and armour structure is proposed. This paper first establishs model Considering metal sheath and armour structure of the outer layer of the cable. The current and voltage along the line can be obtained using the electrical quantities in the head of the conductor, sheath and armour. Then analyzes the fault sequence network of the cable in case of sheath-armour to ground faults. Finally applies the electrical quantities in sequence network, obtaining the fault distance. It can be obtained exact fault distance merely to use the electrical quantities in the head of the conductor, sheath and armour for armour to ground, sheath-armour to ground and conductor- sheath-armour to ground faults. The simulation results show that this method has obvious advantages in the accuracy and reliability of cable fault location.
|
|
Received: 24 March 2020
|
|
|
|
| Cite this article: |
|
Song Qin,Wang Yuanyuan. Fault locating method of cables considering the metal sheath and armour structure[J]. Electrical Engineering, 2020, 21(10): 71-76.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2020/V21/I10/71
|
[1] 张岚, 王献军, 赵卫华. 电力电缆故障定位在线检测研究[J]. 电气技术, 2018, 19(10): 55-58.
[2] 许如怡. 电力电缆故障定位系统的研制[D]. 上海: 上海交通大学, 2012.
[3] 杨林, 王宾, 董新洲. 高压直流输电线路故障测距研究综述[J]. 电力系统自动化, 2018, 42(8): 185-191.
[4] 崔本丽, 兰生. 基于行波法的HVDC输电线路故障测距综述[J]. 电气技术, 2017, 18(10): 1-4, 12.
[5] 彭浩, 沈兴来, 陈奎. 电缆单端故障测距的阻抗-行波组合法[J]. 电力系统保护与控制, 2016, 44(23): 110-114.
[6] 牛耕, 周龙, 裴玮, 等. 低压有源配电网在线故障区间定位与识别方法[J]. 中国电机工程学报, 2017, 37(9): 2525-2538.
[7] 唐进, 张姝, 林圣, 等. 计及金属护层结构的电缆单端故障测距方法[J]. 中国电机工程学报, 2016, 36(6): 1748-1756, 1789.
[8] Rahmati A, Adhami R.A fault detection and classi- fication technique based on sequential components[J]. IEEE Transactions on Industry Applications, 2014, 50(6): 4202-4209.
[9] Bedoya-Cadena A F. Herrera-Orozco R A, Mora-Flórez, et al. Fault location considering load uncertainty and distributed Generation in power distribution systems[J]. Transmission&Distribution, 2015, 9(3): 287-295.
[10] 董张卓, 王清亮, 黄国兵. 配电网和配电自动化系统[M]. 北京: 机械工业出版社, 2014. |
|
|
|
2020, Vol. 21 
