|
|
|
| Introduction and Analysis of the Dynamic Response Testing Method of Reactive Power Compensation Ark |
| Zhang Yezhen |
| Fujian Inspection and Research Institute for Product Quality, Fuzhou 350002 |
|
|
|
|
Abstract mainly according to the standard of GB/T5576-2008 low voltage complete sets of reactive power compensate device, this article introduces the test method and principle of dynamic response time detection project. It introduces and analyses the failure which would happen in the test process, such as compensation does not reach the design value. Making the Use of shavings cove coil to gather the time parameter of compensated current waveform, and making the use of SP controller to control the conduction time and stop of distribution line load end. Through the analysis of introduction, we can improve the test efficiency of this project detection.
|
|
Published: 10 October 2013
|
|
|
|
| Cite this article: |
|
Zhang Yezhen. Introduction and Analysis of the Dynamic Response Testing Method of Reactive Power Compensation Ark[J]. Electrical Engineering, 2013, 14(09): 77-79.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2013/V14/I09/77
|
[1] 标准GB/T 15576-2008 低压成套无功功率补偿装置[S].2008.
[2] 马小建,魏金成.电力系统无功电压控制在多Agent系统中的应用研究[J].电工电气,2012(2):29-32. |
|
|
|
2013, Vol. 14 
