基于多种电气增量融合判据的电弧故障诊断方法

Abstract
Figure/Table
References
Related Citation (1)

Download: PDF (2700 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Arc fault is easy to cause equipment burning and fire accidents, the rapid and effective diagnosis is the guarantee of safe and reliable operation of power supply system. According to the random characteristics of arc waveform in the process of arc fault occurrence, this paper proposes an arc fault diagnosis method based on multiple electrical incremental fusion criteria. Firstly, the disturbance process is quickly determined and verified according to the characteristics of sinusoidal continuous three-point sampling data and the relationship between the same point sampling data for two consecutive weeks. Then, the effective values of current, voltage and real-time power in each period formed by each sampling point in the previous period and after the disturbance, the relative increments of voltage, current and power in two consecutive periods, and the relative increments of harmonic and harmonic in each period before and after the disturbance are calculated. Finally, the fusion criterion is formed based on the monotonic variation characteristics of various electrical increments in the disturbance process to determine whether the arc fault occurs in the circuit. This criterion can quickly identify the arc fault, and it is not affected by the disturbance phenomena caused by the increase or decrease of normal load and the characteristics of non-stretching short circuit fault, so as to prevent misjudgment.

Key words： arc fault transient disturbance electrical increment monotonicity feature

Received: 29 July 2021

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHAO Jie
	DONG Jimin
	ZHANG Yanping

Cite this article:

ZHAO Jie,DONG Jimin,ZHANG Yanping. An arc fault diagnosis method based on multiple electrical incremental fusion criterion[J]. Electrical Engineering, 2022, 23(2): 79-87.

URL:

http://dqjs.cesmedia.cn/EN/Y2022/V23/I2/79

[1] 王启龙, 王博文, 管红立, 等. 低压交流串联故障电弧模型及实验[J]. 电力系统及其自动化学报, 2018, 30(2): 26-29.
[2] 张冠英, 张晓亮, 刘华, 等. 低压系统串联故障电弧在线检测方法[J]. 电工技术学报, 2016, 31(8): 109-115.
[3] 王先发, 顾卫祥. 光伏系统直流侧故障电弧的检测与判别[J]. 电气技术, 2019, 20(5): 10-13.
[4] 白辉, 许志红. 基于小波包变换和高阶累积量的电弧故障识别方法[J]. 电力自动化设备, 2020, 40(11): 195-202.
[5] 卢其威, 王涛, 李宗睿, 等. 基于小波变换和奇异值分解的串联电弧故障检测方法[J]. 电工技术学报, 2017, 32(17): 208-217.
[6] 郭凤仪, 高洪鑫, 唐爱霞, 等. 局部二值模式直方图匹配的串联故障电弧检测及选线[J]. 电工技术学报, 2020, 35(8): 1653-1661.
[7] 崔芮华, 李泽, 佟德栓. 基于三维熵距和熵空间的航空电弧故障检测与分类技术[J]. 电工技术学报, 2021, 36(4): 869-880.
[8] 范李平, 袁兆强, 张凯. 基于小波变换的单相接地故障电弧模型及其PSCAD/EMTDC仿真研究[J]. 电力系统保护与控制, 2011, 39(5): 51-56.
[9] 马征, 张国刚, 柯春俊. 一种基于高频电流频谱分析的故障电弧检测方法[J]. 低压电器, 2010(9): 10-12.
[10] 刘湘澎, 李宏文, 张小青, 等. 调光灯电弧电流的谐波分析[J]. 电气应用, 2012(20): 36-39.
[11] 卢其威, 巫海东, 王肃珂, 等. 基于差值-均方根法的故障电弧检测的研究[J]. 低压电器, 2013(1): 6-13.
[12] 雍静, 桂小智, 牛亮亮, 等. 基于自回归参数模型的低压系统串联电弧故障识别[J]. 电工技术学报, 2011, 26(8): 213-219.
[13] 谢振华, 苏晶晶, 傅炳, 等. 两种电弧故障保护电器的对比分析[J]. 电气技术, 2020, 21(12): 62-67.
[14] 张士文, 张峰, 王子骏, 等. 一种基于小波变换能量与神经网络结合的串联型故障电弧辨识方法[J]. 电工技术学报, 2014, 29(6): 209-302.
[15] 董继民. 基于采样值估算的电压扰动快速定位方法[J]. 电力系统保护与控制, 2010, 38(9): 92-95.