|
|
|
| Development of Transformer Winding Deformation Tester Based on FPGA |
| Chen Chao |
| Qujiang Power Supply Bureau, Shaoguan, Guangdong 512100 |
|
|
|
|
Abstract This paper is based on the principle which the frequency response method about the deformation of Transformer Winding. Using the advantages of embedded FPGA core and parallel processing, designs the transformer winding deformation tester. The signal generator utilizes FPGA to control the AD9854 generating sweep signal. The sweep frequency band ranges 0～8MHz. The pure sine wave signal is obtained by Low-pass filter and finally by the amplitude amplification and power amplification for generating the test signal of transformer winding. This device can measure the magnitude and phase frequency characteristics of transformer, through the software increases separation test of the frequency curve and phase curve. Taking the samples directly and using the RMS conversion method to obtain the signal in the amplitude-frequency test make the measurement of amplitude-frequency characteristics more quickly.
|
|
Published: 10 October 2013
|
|
|
|
[1] 张琛. 变压器绕组变形测试方法及应用[J]. 变压器, 2007, 44(2): 35-37.
[2] 诸兵, 曾雪梅, 黄晓艳. 变压器绕组变形监测的研究现状综述[J]. 四川电力技术, 2009, 32(3): 48-53.
[3] 辜超. TWD-Ⅱ型变压器绕组变形测试仪的研制及应用[J]. 山东电力技术, 2002(5): 8-11.
[4] 章叔昌. 基于LabVIEW的变压器绕组变形测试仪[J].江西电力, 2009, 33(5): 38-41.
[5] 于云飞, 胡学龙, 方宇. 基于FRA的变压器绕组变形的分频段研究[J]. 扬州大学学报(自然科学版), 2009, 12(3): 34-38.
[6] 黄智伟. FPGA系统设计与实践[M]. 北京: 电子工业出版社, 2005.
[7] COMS 300 MSPS Quadrature Complete DDS-AD9854 Datasheet. Analog Devices Inc, 2004.
[8] 董军刚, 蔡振江, 王福顺, 等. 基于DDS技术的智能信号发生器的设计[J]. 微计算机信息, 2007, 23(4-2): 298-299.
[9] 王小利. 宽带直流放大器系统设计[J]. 电子器件, 2010, 33(3): 392-394.
[10] 陈仁伟, 朱长青, 岳夕彪. 高准确度有效值转换电路的设计与实现[J]. 电子测量技术, 2010, 33(6): 20-23.
[11] 刘延华, 张承学, 代芬. 12位高速ADC存储电路设计与实现[J]. 单片机与嵌入式系统应用, 2003(5): 33-35. |
|
|
|
2013, Vol. 14 
