|
|
Harmonics Analyzing Method based on Moved-FFT for ACB |
Huang Rongrong, Bai Jianshe |
Delixi Electric Ltd, Shanghai 201812 |
|
|
Abstract Harmonics is not only an inherent problem of power system, but also has great influence on the devices in power system. In this article, a harmonic analysis method based on the moved-FFT was offered, which was applied to the intelligent controller of air breaker circuit (ACB) to reduce the computation of the discrete Fourier transform (DFT). It was helpful for the on-line monitoring harmonics in the embedded microcontroller or microprocessor, as well as met the quickness requirement of ACB protection.
|
Published: 22 December 2014
|
|
|
|
[1] Pei-Chen Lo, Yu-Yun Lee. Real-time implementation of the moving FFT algorithm[J]. Signal Processing, 1999, 47(79): 251-259. [2] Pei-Chen Lo, Yu-Yun Lee. Real-time implementation of the split-radix FFT-An algorithm to efficiently construct local butterfly modules[J]. Signal Proce- ssing, 1998, 46(71): 251-259. [3] Sherlock B G. Windowed discrete Fourier transform for shifting data[J]. Signal Processing, 1999, 74: 169- 177. [4] 谷萩隆嗣著. 薛培鼎, 徐国鼐译. 快速算法与并行信号处理[M]. 北京: 科学出版社, 2003. [5] 肖湘宁. 电能质量分析与控制[M]. 北京: 中国电力出版社, 2004. [6] GB/T 14549—1993, 电能质量公用电网谐波[S]. [7] IEEE Std 519-1992, IEEE recommended practices and requirements for harmonic control in electrical power systems[S]. [8] IEC 61000-4-7-2002, General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto[S]. |
|
|
|