电气技术  2018, Vol. 19 Issue (9): 23-27    DOI:
研究与开发 |
基于有限元的隔离开关触头系统电-热耦合场计算与热稳定性分析
刘雨芳, 张旻
湖南工贸技师学院, 湖南株洲412000
The thermo-electric coupled fields calculation and themal stability analysis of disconnector contact system based on finite element method
Liu Yufang, Zhang Min
College of Industry and Trade of Hunan, Zhuzhou, Hunan 412000
全文: PDF (15688 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 隔离开关在高压电网中使用量巨大,其工作可靠性将直接影响电网的稳定运行。导电回路(尤其是动、静触头接触部位)过热经常给隔离开关正常运行造成隐患。本文采用电-热间接耦合的有限元法,首先进行涡流场计算以求出电流密度与生热作为载荷; 随后综合运用接触力学和电接触相关理论,计算了接触电阻以及热流密度; 最终论文分析了自然对流条件下触头系统热稳定性情况。通过分析温升,证明其具有较强热稳定性。本文研究结果具有一定的工程实用价值与指导意义。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘雨芳
张旻
关键词 隔离开关温升有限元法热稳定性    
Abstract:The disconnector usage amount is big in high voltage power grid. The operational reliability of disconnector will directly influence the stability of power supply. The overheat problem of conductive part, especially contact zone of contact, always caused hidden danger of normal operation. This paper used the electric-heat coupling finite element method, calculated the vortex field firstly to make the current density and heat as the load of the next step. Then calculated contact resistance and heat flux based on elastic mechanics and electric contact theory. Finally, the paper analyzed the themal stability of contact under the condition of natural convection. The strong thermal stability was proved by temperature rise analysis. The results of this paper have some practical value and guiding meaning in engineering.
Key wordsdisconnector    temperature rise    finite element method    thermal stability   
收稿日期: 2018-02-13      出版日期: 2018-10-23
作者简介: 刘雨芳(1991-),女,湖南株洲人,硕士研究生,讲师。研究方向为高压电器电磁场分析与优化设计。
引用本文:   
刘雨芳, 张旻. 基于有限元的隔离开关触头系统电-热耦合场计算与热稳定性分析[J]. 电气技术, 2018, 19(9): 23-27. Liu Yufang, Zhang Min. The thermo-electric coupled fields calculation and themal stability analysis of disconnector contact system based on finite element method. Electrical Engineering, 2018, 19(9): 23-27.
链接本文:  
https://dqjs.cesmedia.cn/CN/Y2018/V19/I9/23