电气技术  2018, Vol. 19 Issue (11): 88-90    DOI:
技术与应用 |
一种变电站直流系统绝缘选线试验装置的研究与设计
毛焱, 冯灿成
广东电网有限责任公司中山供电局,广东 中山 528400
Research and design of a test device for insulation selection of DC system in the transformer substation
Mao Yan, Feng Cancheng
Zhongshan Power Supply Bureau of Guangdong Power Grid Company, Zhongshan, Guangdong 528400
全文: PDF (8132 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 直流系统是变电站安全运行的重要组成部分。变电站直流系统绝缘选线试验是直流定检工作中的重要一环,可在直流负载支路绝缘降低时,有效检验直流系统中安装的绝缘监测装置能否准确发出绝缘降低支路选线告警。本文通过设计简易合理的控制电路,利用转换开关实现接地母线选择,并通过接地电阻调节及漏电流传感器线夹设计,提高变电站直流系统绝缘选线试验效率,降低试验过程误碰直流母线的风险,达到提高人机功效的最终目的。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
毛焱
冯灿成
关键词 转换开关线夹高效    
Abstract:DC system is an important part of the safe operation of substation. The insulation selection test of dc system in transformer substation is an important part of the dc test, which can effectively verify that the insulation monitoring device installed in the dc system can alarm the reduced insulation dc load branch accurately when the insulation of the dc load branch is reduced. By designing simple and reasonable control circuit, ground busbar selection is realized by using change-over switch, and by grounding resistance adjustment and leakage current sensor wire clamp design, it is possible to improve the efficiency of transformer substation dc system insulation line selection test, reduce the risk of mistakenly touching the dc bus during the test, and achieve the ultimate goal of man-machine efficacy.
Key wordschange-over switch    wire clamp    efficient   
收稿日期: 2018-05-12      出版日期: 2018-11-16
作者简介: 毛 焱(1986-),男,硕士,从事变电站直流系统维护工作。
引用本文:   
毛焱, 冯灿成. 一种变电站直流系统绝缘选线试验装置的研究与设计[J]. 电气技术, 2018, 19(11): 88-90. Mao Yan, Feng Cancheng. Research and design of a test device for insulation selection of DC system in the transformer substation. Electrical Engineering, 2018, 19(11): 88-90.
链接本文:  
https://dqjs.cesmedia.cn/CN/Y2018/V19/I11/88