Abstract：In order to prevent sudden insulation faults in the operation of large power transformers, the mechanical damage mechanism of turn insulation during the winding process and the development mechanism of internal discharge in materials such as insulation boards and stays induced by insulation paper damage are analyzed in this paper. Based on the statistical data, the evaluation indicates that under the same conditions, the increased friction force during the winding of high-voltage coils for 220~750 kV transformer is approximately 3.27~17.26 times that of high-voltage coils for 110 kV transformer. On this basis, the possible causes of internal discharge of the insulating material like stays and insulation boards induced by the abnormal insulation of the coil turn are proposed. Furthermore, the internal discharge development mechanism of insulating materials such as stays and insulation boards is analyzed, revealing a discharge development law of “external induction and internal propagation” in these materials. The causes are discussed whereby the development of internal discharge in insulation materials cannot be monitored by online oil chromatography but may lead to sudden and severe insulation failures inside high-voltage coils. Finally, an improved method for the stays in the first oil gap on the inner side of high-voltage coils of large power transformers is explored, aiming to reduce the risk of sudden severe failures caused by the formation of long-scale discharge channels inside coils due to coil abnormalities.
赵志刚. 大型电力变压器线圈内部突发故障发展机理及线圈改进措施探讨[J]. 电气技术, 2026, 27(6): 77-84.
ZHAO Zhigang. The development mechanism of sudden internal faults in large power transformer winding and design improvement measures. Electrical Engineering, 2026, 27(6): 77-84.
[1] Zhao Zhigang.Analysis of transformer tank defor- mation and rupture, part 1: proposal of analysis method[C]//2025 10th Asia Conference on Power and Electrical Engineering (ACPEE), Beijing, China, 2025: 2588-2594. [2] Zhao Zhigang.Analysis of transformer tank defor- mation and rupture, part 2: checking of ability of transformer tank withstand internal short-circuit arc fault[C]//2025 10th Asia Conference on Power and Electrical Engineering (ACPEE), Beijing, China, 2025: 2595-2599. [3] 谢毓城. 电力变压器手册[M]. 北京: 机械工业出版社, 2003. [4] QB/T 4250—2011 500kV变压器匝间绝缘纸[S]. 北京: 中国轻工业出版社, 2012. [5] JB 6758.1—2007 换位导线第一部分: 一般规定[S]. 北京: 机械工业出版社, 2007. [6] 韩宝家. 电力变压器现代设计技术: 绝缘分析和抗短路能力[M]. 北京: 电子工业出版社, 2024. [7] 水利电力部电力生产司. 关于薄绝缘大型变压器返修处理的意见[Z]. 北京: 1983. [8] 刘晓龙. 电力变压器立式绕线机准自动控制系统的研究[D]. 济南: 山东大学, 2016. [9] Jackson J D.Classical electrodynamics[M]. Third edition. Hoboken, New Jersey, USA: John Wiley and Sons Inc., 1998. [10] Cheng Yangchun, Zhang Shuang, Mao Ting, et al.Propagation mechanism of carbonized trees in oil- cellulose insulation systems of power transfor- mers[C]//2020 IEEE Electrical Insulation Conference (EIC), Knoxville, TN, USA, 2020: 486-489. [11] 邢通. 高密度电工纸板机加工件放电特性研究[D]. 北京: 华北电力大学, 2021. [12] He Dandong, Zhao Zhigang, Tan R.Research on analyzing transformer insulation faults using simulation technology[C]//Proceedings of the 2023 4th International Conference on Control, Robotics and Intelligent System, Guangzhou, China, 2023: 194-200. [13] 林倍民. 基于三比值法的典型变压器故障案例分析[J]. 电气技术, 2023, 24(10): 63-67. [14] 肖佳朋, 曾香平, 杨洋, 等. 特高压并联电抗器油色谱异常故障分析和运维建议[J]. 变压器, 2025, 62(2): 58-65.
2026, Vol. 27 
