|
|
|
| Application research of thin layer hard silver plating process on gas insulated switchgear |
| Xu Xi1, Chen Yang2, Deng Leping1 |
1. Xi’an XD Switchgear Electric Co., Ltd, Xi’an 710077;
2. Xi’an XD High Voltage Apparatus Co., Ltd, Xi’an 710300 |
|
|
|
|
Abstract In the functional silver plating of high-voltage electrical product disconnecting switch friction contact parts, a process technology to improve production efficiency and reduce production cost is studied. The hardness of the silver layer was increased by adding addition. By comparing the hardness of the silver layer was controlled by controlling the thickness of the silver layer to 10μm, 20μm and 30μm respectively. The hardness of the hard silver of 10μm was selected. Comparison with a 50μm thick silver. The results show that the thin layer of hard silver has better wear resistance and electrical properties are also in line with engineering requirements. Therefore, the thin layer hard silver plating process improves the wear resistance of the silver layer, reduces the thickness of the silver layer, and achieves the engineering goal of efficient cost reduction.
|
|
Received: 03 July 2019
Published: 27 February 2020
|
|
|
|
| Cite this article: |
|
Xu Xi,Chen Yang,Deng Leping. Application research of thin layer hard silver plating process on gas insulated switchgear[J]. Electrical Engineering, 2020, 21(2): 134-137.
|
|
|
|
| URL: |
|
https://dqjs.cesmedia.cn/EN/Y2020/V21/I2/134
|
[1] DL/T1424—2015. 电网金属技术监督规程[S].
[2] GB1985—2004. 高压交流隔离开关和接地开关[S].
[3] 杨堃, 宋杲, 曹德新, 等. 隔离开关触头寿命的试验研究[J]. 智能电网, 2014, 2(2): 63-66.
[4] 周炳祥. 氰化光亮镀硬银[J]. 材料保护, 1991(7): 32-34.
[5] 王宗雄, 储荣邦, 鲍新华. 实用氰化镀银工艺[J]. 电镀与涂饰, 2015, 34(24): 1424-1438.
[6] 刘纯, 谢亿, 陈军君, 等. 高压隔离开关触指镀银层现场测厚技术开发[J]. 湖南电力, 2010, 30(5): 14-16.
[7] 徐雪霞, 冯砚厅, 柯浩, 等. 高压隔离开关触头镀银层质量检测分析[J]. 河北电力技术, 2013, 32(3): 3-5, 11.
[8] 刘建军, 杨庆旭. 高压开关设备镀银层硬度检测技术介绍[J]. 江苏电机工程, 2010, 29(6): 83-84.
[9] 徐滨士, 董世运, 马世宁, 等.n-Al2Op3/Ni复合刷镀层的组织和摩擦磨损特性[J]. 材料保护, 2002, 35(6): 6-8.
[10] 郑晓华, 刘辉, 章荣, 等. 不同纳米氧化铝含量Ni- P-Al2O3化学镀层的高温磨损性能[J]. 中国有色金属学报, 2014, 24(7): 1804-1811.
[11] 杜鑫. 一种GIS设备回路电阻测试方法探索与实践[J]. 电气技术, 2017, 18(10): 119-122.
[12] 侯志刚, 苏俊, 曾生健, 等. 断路器回路电阻测试影响因素分析[J]. 电气技术, 2015, 16(3): 136-138. |
|
|
|
2020, Vol. 21 
