|
|
|
| Research on the double hole positioning system of the truss type transformer core lamination machine |
| LIU Jing, ZHANG Jingxiao |
| CECEP Xi’an Qiyuan Mechanical and Electrical Equipment Co., Ltd, Xi’an 710018 |
|
|
|
|
Abstract To meet the production demand for offline automatic stacking of large transformer cores, this paper researches on the feasibility of the double hole positioning system of the truss type transformer core laminating machine, introduces visual positioning technology and conducts data verification. In the paper, by means of building an actual architecture and combining corresponding control theories and algorithms, the performance, precision, stability and reliability of the system are analyzed and evaluated. The experimental data and analysis results based on practical application scenarios indicate that the system is feasible.
|
|
Received: 11 October 2024
|
|
|
|
| Cite this article: |
|
LIU Jing,ZHANG Jingxiao. Research on the double hole positioning system of the truss type transformer core lamination machine[J]. Electrical Engineering, 2025, 26(1): 80-84.
|
|
|
|
| URL: |
|
https://dqjs.cesmedia.cn/EN/Y2025/V26/I1/80
|
[1] 李彦虎, 赵丹, 闫超虎, 等. 变压器硅钢片智能化物流线的规划与设计研究[J]. 变压器, 2022, 59(8): 8-11.
[2] 王兵, 陈益萍, 徐华生, 等. 变压器铁心及夹件接地电流在线监测装置[J]. 电气技术, 2023, 24(6): 69-73, 78.
[3] 赵小军, 张佳伟, 王浩名, 等. 电-磁-机耦合视域下考虑气隙影响的变压器铁心振动特性精细化模拟方法[J]. 电工技术学报, 2024, 39(14): 4257-4269.
[4] 窦润田, 李永建, 张献, 等. 受工艺孔影响的变压器铁心损耗计算与分析[J]. 电工技术学报, 2022, 37(12): 2909-2923.
[5] 张日, 季晴. 基于有限元仿真的多边形空心电动机轴强度分析[J]. 电气技术, 2024, 25(8): 47-52.
[6] 郑东方, 陈亮. 基于有限元方法的山地输电杆塔接地特性分析[J]. 电气技术, 2024, 25(8): 53-57.
[7] 刘思诺, 武志涛. 基于改进经验模态分解的直线电机伺服系统迭代学习控制[J]. 电气技术, 2024, 25(4): 32-37.
[8] 倪启南, 杨明, 李云嵩, 等. 全闭环伺服驱动系统位置控制通信延时补偿技术[J]. 电工技术学报, 2022, 37(10): 2513-2522.
[9] 陈晗彬. 基于双目视觉定位的机械臂智能抓取控制研究[J]. 机电工程技术, 2023, 52(12): 115-119.
[10] 刘亚魁, 李红运, 林天然, 等. 基于机器视觉的高压断路器机械特性测量方法[J]. 电工技术学报, 2023, 38(增刊1): 222-230. |
|
|
|
2025, Vol. 26 
