Abstract：Based on the current transformer works to establish and analyze the equivalent circuit model of the current transformer induction power supply. Demonstrates the relationship between the current transformer and the output voltage of the output power, the magnetizing current and the secondary side of the load and the like. Deduced power transfer characteristic equation of the current transformers. Based on this proposed regulation circuit based Boost the maximum power point tracking (MPPT) algorithm to achieve the current transformer to take power system has a maximum power point tracking. Matlab/Simulink software based control plane algorithm for the simulation, the final test showed that the current transformer to take power supply within the current range of 70~500A is able to achieve maximum power output.
徐质彬,王武. 电流互感器取电的最大功率点跟踪控制算法的研究[J]. 电气技术, 2015, 16(05): 35-38.
Xu Zhibin,Wang Wu. Study of Current Transformer to Take Maximum Power Point Tracking Control Algorithms. Electrical Engineering, 2015, 16(05): 35-38.
[1] Andrew C. Corney. Simple Absolute Method for Current Transformer Calibration. IEEE, transactions on Instrumentation and measurement, 2001, 50(2): 278-281. [2] Jae Kap Jung, Jeon Hong Kang, Sang Hwa Lee, et al. A New Method for Calibrating Standard Current Transformers up to 20kA. Meas. Sci. Technol, 2007(11): 3309-3315. [3] Ali Hooshyar and Majid Sanaye-Pasand, CT Saturation Detection Basedon Waveform Analysis Using a Variable-Length Window IEEE Trans. Power Del., vol. 26, no. 3, pp. 2040-2-50, 2011. [4] 刘亚东, 王葵, 陈家伟, 等. 基于相角控制法的电流互感器取电电源设计[J]. 电力系统自动化, 2011, 35(19): 72-75. [5] 刘亚东, 王又佳, 陈静, 等. 基于功率控制法的电流互感器取电电源设计[J]. 电力系统自动化, 2010, 34(3): 70-74. [6] Yuwei Shang, Huayang Li, Jinhua Wang, Jiande Wu, Xiangning He “Analysis and Design of a Current Transformer Fed Power Supply from High AC Voltage Cable. sponsored by the NationalNatureScience Foundation of China IEEE, 2012: 177-182. [7] 周健瑶. 结合超级电容和锂电池的电流互感器取能电源研究[D]. 重庆: 重庆大学, 2013. [8] 李志先, 杜林, 陈伟根, 等. 输电线路状态监测系统取能电源的设计新原理[J]. 电力系统自动化, 2008, 32(1): 76-80.
2015, Vol. 16 
