1050MW发电机定子绝缘值降低的原因分析及处理方法

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (11405 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要某电厂1050MW机组发电机定子冷却水汇流管为直接接地结构,在机组开机起动过程中,屡次出现发电机定子绝缘<0.1MΩ,无法满足发电机厂家要求,影响机组起动并网,本文以国产1050MW发电机组为例,通过研究分析发电机组定子绝缘低原因,揭示影响绝缘值因素,并提出控制处置方案,有效解决问题。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	郭建仙

关键词 ：绝缘, 发电机, 定子, 定冷水

Abstract：The generating sets stator cooling water Combining-flow pipe of a 1050MW power plant is direct grounding structure. The insulation resistance of the stator is below 0.1MΩ frequently during the start-up of the sets, which is unable to meet the requirements of generator manufacturers, and affects the unit bring online. Taking domestic 1050MW generating sets as an example, this paper analyzes the reason of low stator insulation of generating units, reveales the factors influencing the Insulation resistance, and proposes the control and disposal scheme to effectively solve the problem.

Key words： insulation resistance generator(generating sets) stator cooling water

收稿日期: 2018-11-06 出版日期: 2019-07-16

作者简介: 郭建仙（1980-），男，福建莆田人，本科，技师，工程师，主要从事电厂集控运行和维护工作。

引用本文:

郭建仙. 1050MW发电机定子绝缘值降低的原因分析及处理方法[J]. 电气技术, 2019, 20(7): 91-94. Guo Jianxian. Cause analysis and treatment of low stator insulation for 1050MW generator. Electrical Engineering, 2019, 20(7): 91-94.

链接本文:

http://dqjs.cesmedia.cn/CN/Y2019/V20/I7/91