Electrical Engineering  2013, Vol. 14 Issue (11): 16-21    DOI:
Research & Development Current Issue| Next Issue| Archive| Adv Search |
The New Tuning Method of Arc Suppressing Coil for Distribution Network
Xia Xiaofei
Guangxi Electric Power Research Institute, Nanning 530023

Download: PDF (896 KB)   HTML (1 KB) 
Export: BibTeX | EndNote (RIS)      
Abstract  The existing tuning method of post-set arc suppressing coil for distribution network is running at a status away from the resonance point when the system is normal and adjusting quickly to overcompensation when single-phase ground happens. In this paper, the defects of the method which includes long response time, high overvoltage level and misjudgment of fault line selection in high-resistance grounded situation are assessed through ATP-EMTP simulation. Based on the simulation results, a new tuning method of arc suppression coil is proposed. The new method is presetting arc suppression coil to 40% off degree when the system is normal and adjusting to overcompensation after a time window of 100ms, during which time accurate line selection utilizing characteristics of undercompensationis in progress, when single-phase ground is detected.The superiority of the new arc suppression coil tuning method is proved through simulation results.
Key wordsarc suppressing coil      undercompensation      intermittent arc grounding      grounding line selection      evaluation and optimization     
Received: 26 June 2014      Published: 23 January 2014
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Xia Xiaofei
Cite this article:   
Xia Xiaofei. The New Tuning Method of Arc Suppressing Coil for Distribution Network[J]. Electrical Engineering, 2013, 14(11): 16-21.
URL:  
https://dqjs.cesmedia.cn/EN/Y2013/V14/I11/16
Copyright © Electrical Engineering
Supported by: Beijing Magtech