|
|
|
| About the Fault Analysis of the Cutting Machine’s Two Guns Meet Troubleshooting Automatic Return |
| Song Xinfeng, Zhong Min |
| 1.School of Electrical Engineering, Xi' an Jiaotong University, Xi’an 710049; 2. Shaanxi Regional Electric Power Group Co., Ltd, Xi’an 710061 |
|
|
|
|
Abstract High voltage transmission line is the main channel of transmitting electricity, and the operation reliability is close to power effective transmission. In this paper, by analyzing advantages and disadvantages of single-ended traveling wave method and double-ended traveling wave method, transmission line fault location technology based on the OPGW cable was proposed. Basic Principle and advantages of this fault location technology were also introduced. Three-phase overhead lines fault model was constructed which including two transformer substations and transmission lines at the voltage level of 220 kV based on PSCAD. Through a variety of simulations on transmission line under different fault types in different fault points, the changing characteristics of voltage and current were found. In addition, the transient process of the fault phase voltage waveform was analyzed in detail and the fault point was located using the wave pattern features. By comparison, the simulation results and the actual location of fault point were very close, which proved the feasibility of this fault location method.
|
|
Published: 04 November 2014
|
|
|
|
| Cite this article: |
|
Song Xinfeng,Zhong Min. About the Fault Analysis of the Cutting Machine’s Two Guns Meet Troubleshooting Automatic Return[J]. Electrical Engineering, 2014, 15(10): 42-44.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2014/V15/I10/42
|
[1] 张国范.计算机控制系统[M].北京:冶金工业出版社. 2004.
[2] 金元友. 抗干扰技术一在CNC等离子火焰切割机的应用[J]. 装备维修技术,2004(3).
[3] 徐义亨.工业控制工程中的抗干扰技术[M].上海:上海科学技术出版社,2010. |
|
|
|
2014, Vol. 15 
