|
|
|
| Research and Design of a Build-in High Voltage Fuse Outdoor Device |
| Hao Hongliang, Zhu Zengjun, Jiang Feng |
| Xuzhou Power Supply Company of State Grid, Xuzhou, Jiangsu 221009 |
|
|
|
|
Abstract A novel build-in high voltage outdoor safety device has been developed in order to match the requirement of shortening the safety-fuse replacing time after fusing, as well as increasing the response capability of the grid. This paper analyzed the main factors that effecting the safety-fuse replacing time. The structure of the device has been improved under the consideration of outdoor environment. The test and operating results show that the replacing time has been shortened significantly by utilizing the novel device, the economic benefit also increase sharply due to the saving of manpower.
|
|
Published: 02 June 2015
|
|
|
|
| Cite this article: |
|
Hao Hongliang,Zhu Zengjun,Jiang Feng. Research and Design of a Build-in High Voltage Fuse Outdoor Device[J]. Electrical Engineering, 2015, 16(06): 104-106.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2015/V16/I06/104
|
[1] 刘喆. 配电网消弧及铁磁谐振监测与控制技术的研究[D]. 北京: 华北电力大学, 2008.
[2] Sugimoto S, Neo S, Arita H, et al. Thyristor controlled ground fault current limiting system for ungrounded power distribution system[J]. IEEE Transaction on Power Delivery, 1996, 11(2): 940-945.
[3] 耿向阳. 电压互感器高压保险熔断原因分析及治理措施[D]. 天津: 天津大学, 2009.
[4] RXWO系列高压保险使用说明. 南通: 如皋高压电器厂, 1996.
[5] 南晓强, 李群湛. 配电网高压保险丝故障原因的仿真分析[J]. 电力系统及其自动化学报, 2011, 23(6): 96-100. |
|
|
|
2015, Vol. 16 
