|
|
|
| Research on the Differentiation and Precision of the Crossing Overhead Transmission Line Measurement and Calculation |
| Bian Yuping1, Zhang Baiqing2, Lu Qing3, Kang Yubin2, Xie Wei2 |
1. School of Electric Power Engineering; Nanjing Institute of Technology,Nanjing 211167;
2. Jiangsu Electric Power Company Maintenance Branch,Nanjing 211102;
3. Jiangsu Province Power Company Power Economic and Technology Institute,Nanjing 210009 |
|
|
|
|
Abstract In recent years, the State Grid Provincial Company has carried out much work experience, and has studied various methods for different situations, which can be used as reference for line design, construction, operation and maintenance and other relevant technical units. This paper described differential choice crossing transmission measurement and conversion methods and measures. When field measurement is difficult and requires sophisticated cross range conversion, this paper put forward a feasible method and developed a set of parameters for precise calculation, and through practical application, verify its feasibility and reliability. So that the scene of cross measurement more accurate and feasible, and improved the equipment of lean operation and management level.
|
|
Published: 20 January 2017
|
|
|
|
| Cite this article: |
|
Bian Yuping,Zhang Baiqing,Lu Qing等. Research on the Differentiation and Precision of the Crossing Overhead Transmission Line Measurement and Calculation[J]. Electrical Engineering, 2017, 18(1): 44-51.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2017/V18/I1/44
|
[1] 王晖. 输电线路交叉跨越等级管理研究与探讨[C]//第四届全国架空输电线路技术交流研讨会论文集, 济南, 2013: 211-220.
[2] 中华人民共和国国家经济贸易委员会. DL/T 5146— 2001. 35kV-220kV架空送电线路测量技术规程[S].
[3] 张正禄. 工程测量学[M]. 武汉: 武汉大学出版社, 2005.
[4] 顾水福, 薛春林, 陈功, 等. 220kV同塔四回线路跨越高铁安全性分析[J]. 华东电力, 2014(11): 2406- 2410.
[5] 钱红健. 特殊地形下线路交跨距离的测量与计算[J]. 中国新技术新产品, 2012(24): 43-44.
[6] 申屠柏水, 李健. 水面上空输电线路垂直距离的测量[J]. 浙江电力, 2013(1): 73-74, 77.
[7] 郭小波, 刘朝辉. 交叉跨越测量方法探讨[J]. 价值工程, 2013(15): 319-321.
[8] 卞玉萍, 杨志超, 郝思鹏, 等. 带负荷等电位测量架空输电线路特殊跨越段弧垂[J]. 电测与仪表, 2014, 51(4): 53-56, 91.
[9] 马玉忠. 新型便携式输电线路交跨测量仪的研制[J]. 电工技术, 2011(2): 6-8.
[10] 唐云岩. 送电线路测量[M]. 北京: 中国电力出版社, 2004.
[11] 郑晓凡, 曾璧环. 抛物线式档端角度观测法测控架空电力线弧垂的误差分析[J]. 浙江电力, 2011, 30(4): 27-29.
[12] 刘正军, 袁金东, 宋国锋. 一起输电线路交叉跨越距离不足处理方法探讨[C]//2011年亚太智能电网与信息工程学术会议论文集, 2011: 46-49.
[13] 傅中, 程登峰, 季坤, 等. 一起220kV与10kV线路交叉跨越放电跳闸事故[J]. 电世界, 2015, 56(2): 8-11.
[14] 中华人民共和国住房和城乡建设部. GB 50545 110- 750kV架空送电线路设计规范[S].
[15] 国家电力公司东北电力设计院. 电力工程高压送电线路设计手册[M]. 北京: 中国电力出版社, 2003.
[16] 康宇斌, 卞玉萍. 特殊环境中输电线路的一种弧垂观测方法[J]. 供用电, 2011, 28(5): 70-73.
[17] 国家能源局. DL/T 741—2010 架空输电线路运行规程[S].
[18] 孟遂民, 孔伟. 架空输电线路设计[M]. 北京: 中国电力出版社, 2007.
[19] 丁毓峰. 精通MATLAB混合编程[M]. 北京: 电子工业出版社, 2012.
[20] 王彤, 袁翔. 非承力导线弧垂计算及承力钢绞线的选用[J]. 华东电力, 2011, 39(2): 280-281. |
|
|
|
2017, Vol. 18 
