用振动法监测变压器铁心状况时加速度传感器的最佳位置选择

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (20139 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Core looseness faults are common for transformers. When core looseness faults occur, vibration signals of iron core generated by magnetostriction are altered, and vibration signals of tank surfaces are altered as well. So it is feasible to use vibration method which is to analyze the vibration signals of tank surfaces to monitor transformer core condition. The vibration characteristics of a voltage regulator are derived at multiple points using acceleration sensors. The frequency spectrum of typical points are analyzed. The optimal location of acceleration sensors are found based on the law of the magnitude of vibration signals and the voltage squared. The structure of the voltage regulator is similar to that of a common wound-rotor asynchronous motor working at braking condition. Thus, working principles of both are also similar. So, it will no doubt provide reference for practical application of vibration method to monitoring transformer conditions.

Key words： iron core vibration magnetostriction frequency spectrum optimal location acceleration sensor

Received: 25 December 2018 Published: 29 September 2019

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Liu Shengjun
	Cheng Cheng
	Shen Chen
	Gong Lele
	Cai Xinjing

Cite this article:

Liu Shengjun,Cheng Cheng,Shen Chen等. Optimal location selection of acceleration sensors for monitoring transformer core condition based on vibration signal analysis method[J]. Electrical Engineering, 2019, 20(10): 6-10.

URL:

http://dqjs.cesmedia.cn/EN/Y2019/V20/I10/6

[1] 王永强, 律方成, 李和明. 基于粗糙集理论和贝叶斯网络的电力变压器故障诊断方法[J]. 中国电机工程学报, 2006, 26(8): 137-141.
[2] 汲胜昌, 刘味果, 单平, 等. 小波包分析在振动法监测变压器铁芯及绕组状况中的应用[J]. 中国电机工程学报, 2001, 21(12): 24-27.
[3] 刘勇, 杨帆, 张凡, 等. 检测电力变压器绕组变形的扫频阻抗法研究[J]. 中国电机工程学报, 2015, 35(17): 4505-4516.
[4] 张凡, 汲胜昌, 师愉航, 等. 电力变压器绕组振动及传播特性研究[J]. 中国电机工程学报, 2018, 38(9): 2790-2798.
[5] 郭洁, 陈祥献, 黄海. 交叉递归图在变压器铁芯压紧力变化检测中的应用[J]. 高电压技术, 2010, 36(11): 2731-2738.
[6] 吴书有. 基于振动信号分析方法的电力变压器状态监测与故障诊断研究[D]. 合肥: 中国科学技术大学, 2009.
[7] 魏晓莹, 宋仕江, 郭谋发, 等. 基于振动信号二维特征向量的配变铁心故障诊断[J]. 电气技术, 2016, 17(1): 16-21.
[8] 张文民, 高夺, 张慧娟, 等. 变压器振动信号稀疏快速傅里叶变换分析[J]. 电气技术, 2017, 18(3): 59-63.
[9] 李林锐, 郑浩, 刘厚康, 等. 变压器振动监测系统检测装置的设计与实现[J]. 电气技术, 2015, 16(12): 6-9, 51.
[10] 林爱弟. 变压器绕组振动特征提取及其状态识别方法研究[D]. 杭州: 浙江大学, 2014.
[11] 徐樊浩. 基于振动信号分析方法的电力变压器状态评估研究[D]. 保定: 华北电力大学, 2017.
[12] Garcia B, Burgos J C, Alonso A M.Transformer tank vibration modeling as a method of detect-ing winding deformations-part I: theoretical foundation[J]. IEEE Transactions on Power Delivery, 2006, 21(1): 157-163.
[13] Garcia B, Burgos J C, Alonso A M.Transformer tank vibration modeling as a method of detect-ing winding deformations-part II: experimental verification[J]. IEEE Transactions on Power Delivery, 2006, 21(1): 164-169.
[14] 宋天慧. 运行中变压器表面振动信号特征分析与提取[D]. 北京: 华北电力大学, 2017.
[15] 马宏忠, 赵宏飞, 陈楷, 等. 基于振动的变压器铁心松动判定方法[J]. 电力系统自动化, 2013, 37(14): 101-106.
[16] 陈楷, 王春宁, 刘洪涛, 等. 基于振动的变压器监测与分析中最优测点选择[J]. 电力系统及其自动化学报, 2013, 25(3): 56-60.
[17] 沈培锋, 赵宏飞, 李凯, 等. 基于振动的变压器铁芯松动定位[J]. 中国电力, 2014, 47(9): 66-70.
[18] 张赢, 马宏忠, 陈楷. 变压器空载振动分析及实测研究[J]. 中国电力, 2012, 45(5): 30-33.
[19] 郭洁, 陈祥献, 黄海, 等. 基于峰度的电力变压器铁芯松动故障在线监测方法[J]. 仪器仪表学报, 2010, 31(11): 2401-2407.
[20] Bartoletti C, Desiderio M, Carlo D D, et al.Vi-bra- acoustic techniques to diagnose power transformers[J]. IEEE Transactions on Power Delivery, 2004, 19(1): 221-229.