|
|
Application of Residual Current Operated Protective Device in Low Voltage Power Distribution System of Non Ferrous Metal Concentrating Mil |
Zhang Dawei, Li Yanjiang, Wang Yun |
Beijing General Research Institute of Mining and Metallurgy, Beijing 100160 |
|
|
Abstract Through the introduction and application of the Residual current operated protective device in this paper, combined with many engineering design examples, this paper puts forward the necessity of the use of residual current operated protective device in several common situations. Residual current operated protective device has protective effect on the single phase grounding fault in TN system.In some cases, the circuit breakers with residual current protection function should be used for motor or line protection.
|
Published: 22 June 2016
|
|
|
|
Cite this article: |
Zhang Dawei,Li Yanjiang,Wang Yun. Application of Residual Current Operated Protective Device in Low Voltage Power Distribution System of Non Ferrous Metal Concentrating Mil[J]. Electrical Engineering, 2016, 17(6): 124-127.
|
|
|
|
URL: |
http://dqjs.cesmedia.cn/EN/Y2016/V17/I6/124
|
[1] 中国机械工业联合会. GB 50054—2011 低压配电设计规范[S]. 北京: 中国计划出版社, 2012. [2] 李瑞荣. 短路电流实用计算[M]. 北京: 中国电力出版社, 2003. [3] 川濑太郎. 高桥健彦著[M]. 北京: 科学出版社, 2003. [4] 王振声, 王玉卿, 等. 4kV配变电系统短路电流计算实用手册[M]. 北京: 中国电力出版社, 2004. [5] 中国航空工业规划设计研究院. 工业与民用配电设计手册[M]. 3版. 北京: 中国电力出版社, 2005. [6] 才国平. 低压配电系统的接地故障与剩余电流保护器的应用[J]. 电气开关, 2000(5): 33-37, 43. |
|
|
|