Electrical Engineering  2016, Vol. 17 Issue (12): 53-58    DOI:
Research & Development Current Issue| Next Issue| Archive| Adv Search |
Solution Design and Implementation for BCU Measurement Effected by High Harmonics
Zhu Herong, Wang Min, Sun Songlin, Zhu Yingkui, Chen Guiyou
NR Electric Co., Ltd, Nanjing 211102

Download: PDF (334 KB)   HTML (1 KB) 
Export: BibTeX | EndNote (RIS)      
Abstract  In order to solve the problem of spectrum aliasing caused by high harmonics, the low-pass filter (LFP) is used by the bay control unit (BCU) before sampling in general. In view of the attenuation of 2~15 times harmonics caused by the low pass filter, and the limitation of fixed compensation method, a frequency autocorrelation compensation algorithm is designed in this paper, in order to ensure the measurement precision, the real-time compensation coefficient of the amplitude and phase is calculated according to the practical frequency calculation, at the same time, in view of the high harmonics influence on frequency calculation, a rotation vector frequency measurement method is designed in this paper, increases the precision of frequency calculation effectively., the effectiveness of the improved scheme is proved through test and actual application.
Key wordsBCU      LPF      spectrum aliasing      frequency autocorrelation      amplitude compensation     
Published: 13 December 2016
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Zhu Herong
Wang Min
Sun Songlin
Zhu Yingkui
Chen Guiyou
Cite this article:   
Zhu Herong,Wang Min,Sun Songlin等. Solution Design and Implementation for BCU Measurement Effected by High Harmonics[J]. Electrical Engineering, 2016, 17(12): 53-58.
URL:  
https://dqjs.cesmedia.cn/EN/Y2016/V17/I12/53
Copyright © Electrical Engineering
Supported by: Beijing Magtech