|
|
|
| Solution of Litz Wire Winding Loss based on Segmented Equivalent Circuit Method |
| Xu Xiangwang, Chen Wei |
| College of Electrical Engineering and Automatic, Fuzhou University, Fuzhou 350108 |
|
|
|
|
Abstract In order to reduce the winding losses of magnetic components, Litz wires brought designers into sharp focus. But its large strands and complex twisting mode makes the winding loss of Litz wires difficult to calculate and simulate. This paper from twisting mode to analysis the current assignment characteristics of different twisting mode of Litz wires, and particularly analysis the concentric twisted Litz wires which is more widespread used in the industry. The thought is proposed that concentric twisted Litz wires can be approximately replaced by segmented stranded parallel wires, and the single wire current of concentric twisted Litz wires can be solved by using the segmented equivalent circuit method based on this thought. Reassignment the single wire current value to 2D stranded parallel wires model for simulation, and then the winding loss of concentric twisted Litz wires can be solved. Finally, it is proved that the segmented equivalent circuit method is effective and accurate for solving the concentric twisted Litz wire winding losses.
|
|
Published: 21 March 2017
|
|
|
|
| Cite this article: |
|
Xu Xiangwang,Chen Wei. Solution of Litz Wire Winding Loss based on Segmented Equivalent Circuit Method[J]. Electrical Engineering, 2017, 18(3): 30-35.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2017/V18/I3/30
|
[1] A Roßkopf EB, Joffe C. Influence of inner skin-and proximity effects on conduction in Litz wires[J]. in IEEE Transactions on Power Electronics. Oct, 2014, 29(10): 5454-5461.
[2] Sullivan R. An equivalent complex permeability model for Litz-wire windings[C]//Industry Applications Con- ference, 3, 2005: 2229-2235.
[3] Eit M Al, Bouillault F, Marchand C, et al. 2-D Reduced Model for Eddy Currents Calculation in Litz Wire and Its Application for Switched Reluctance Machine[J]. in IEEE Transactions on Magnetics, 2016, 52(3): 1-4.
[4] Bartoli M, Noferi N. Modeling litz-wire winding losses in high-frequency power inductors[J]. IEEE PESC'96, 1996, 27(2): 1690-1696.
[5] 周自云. 偏转线圈用利兹(Litz)线的工艺研究[C]//中国电器工业协会电线电缆分会2005年绕组行业“十一•五”发展研讨会, 2005: 100-106. |
|
|
|
2017, Vol. 18 
