|
|
|
| Performance Optimization of 110kV Disconnector based on ANSYS Workbench |
| Huang Mingliang, Lan Sheng |
| College of Electrical Engineering and Automation, Fuzhou University, Fuzhou 350008 |
|
|
|
|
Abstract In order to optimize the temperature rise and electromagnetic field of the conductive circuit of the high disconnector, Solidworks is used to establish three-dimensional model and ANSYS workbench is used to simulation analysis. The simulation analysis and performance optimization of the conductive circuit of the GW5 type disconnector was performed based on the electromagnetic field and temperature field. The maximum electromagnetic field strength and the maximum temperature rise appears in the contact finger structure are obtained by simulation calculation. Tungsten copper can greatly reduce the temperature rise to 23.032℃ and chamfered of the all ends can greatly reduce the maximum electromagnetic field strength of the contact finger structure are summed up by changing the material and structure of the contact finger. The performance optimization scheme proposed and the calculation results in this paper could provide theoretical basis for the design of high voltage disconnector in the future.
|
|
Published: 20 July 2017
|
|
|
|
| Cite this article: |
|
Huang Mingliang,Lan Sheng. Performance Optimization of 110kV Disconnector based on ANSYS Workbench[J]. Electrical Engineering, 2017, 18(7): 5-10.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2017/V18/I7/5
|
[1] 凌颖, 赵莉华, 林显, 等. 高压隔离开关电触头性能改善探讨[J]. 高压电器, 2010, 46(8): 101-105.
[2] 范舜, 崔文军. 高压隔离开关设计与改造[M]. 北京:中国电力出版社, 2007.
[3] 吴冠平, 刘炼. GW5型隔离开关发热故障分析及处理[J]. 电气技术, 2014, 15(1): 101-103.
[4] 董升, 陈文通, 刘松成. 一种隔离kaiguan触头带电维护装置的研制[J]. 电气技术, 2014, 15(12): 89-91.
[5] 律方成, 张兆华, 汪佛池. 基于有限元的动车组高压隔离开关均压环优化设计[J]. 电工技术学报, 2016, 31(19): 218-223.
[6] Liu W F, Zhang Y M, Song K X, et al. Finite element analysis and optimization for the high voltage disconnector self-elastic contact base on ANSYS workbench[J]. Materials Science Forum, 2011(2): 510-516.
[7] 倪光正. 工程电磁场数值计算[M]. 北京: 机械工业出版社, 2004.
[8] 陈强, 李庆民, 丛浩熹, 等. 基于多点分布式光纤光栅的GIS隔离开关触头温度在线监测技术[J]. 电工技术学报, 2015, 30(12): 298-306.
[9] 刘东雨, 李文杰, 韩钰, 等. 高电导率耐热铝合金导体材料的合金设计[J]. 材料热处理学报, 2014, 35(Z1): 17-21.
[10] 范志康, 梁淑华, 肖鹏. 高压电触头材料[M]. 北京:机械工业出版社, 2004.
[11] 阎秀恪, 孙阳, 于存湛, 等. 油浸倒立式电流互感器主绝缘电场分析与优化设计[J]. 电工技术学报, 2014, 29(1): 37-43. |
|
|
|
2017, Vol. 18 
