|
|
|
| Research on Dynamic Inductive Power Transfer System based on a New Topology |
| Yu Jin, Du Kaijun, Gao Shiping |
| CRRC Qingdao Sifang Co., Ltd, Qingdao, Shandong 266111 |
|
|
|
|
Abstract When inductive power transfer (IPT) system serves forthe IPT system serves for rail locomotive, D-type is usuallyused as the transmitter coil and receiver coil. For the transmitter is long, it can result in serious electromagnetic interfere (EMI) issues. Therefore, a 8-typetransmitter coil is applied in IPT system. Because mutual inductance between transmitting coil and receiving coil changessharply, it seriously affectsIPT system output power. Therefore, the DDQ-type coil is used as the receivercoil to balance the output power of IPT system. Finalliy, an IPT experimental system based on 8-type transmitter coil and DDQ-type receiver coil is constructed, and the experimental results show that this method can effectively improve the output power performance.
|
|
Published: 06 December 2017
|
|
|
|
| Cite this article: |
|
Yu Jin,Du Kaijun,Gao Shiping. Research on Dynamic Inductive Power Transfer System based on a New Topology[J]. Electrical Engineering, 2017, 18(11): 75-79.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2017/V18/I11/75
|
[1] 杨庆新, 章鹏程, 祝丽花, 等. 无线电能传输技术的关键基础与技术瓶颈问题[J]. 电工技术学报, 2015, 30(5): 1-8.
[2] 范兴明, 莫小勇, 张鑫. 无线电能传输技术的研究现状与应用[J]. 中国电机工程学报, 2015, 28(10): 2584-2600.
[3] 刘红伟, 张波, 黄润鸿, 等. 感应耦合与谐振耦合无线电能传输的比较研究[J]. 电气技术, 2015, 16(6): 7-13.
[4] Kim J H, Lee B S, Lee J H, et al. Development of 1MW inductive power transfer system for a High- Speed train[J]. IEEE Transactions on Industrial Elec- tronics, 2015, 62(10): 6242-6250.
[5] Lee S, Huh J, Park C, et al. On-line electric vehicle using inductive power transfer system[C]//2010 IEEE Energy Conversion Congress and Exposition, 2010: 1598-1601.
[6] Li M, Chen Q, Hou J, et al. 8-Type contactless transformer applied in railway inductive power transfer system[C]//2013 IEEE Energy Conversion Congress and Exposition. 2013: 2233-2238.
[7] Huh J, Lee S W, Lee W Y, et al. Narrow-Width inductive power transfer system for online electrical vehicles[J]. IEEE Transactions on Power Electronics, 2011, 26(12): 3666-3679.
[8] Nagendra G R, Covic G A, Boys J T. Determining the physical size of inductive couplers for IPT EV systems[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2014, 2(3): 571-583.
[9] Wang C. Design considerations for inductively coupled power transfer systems[D]. University of Auckland Electrical and Electronic Engineering, 2004.
[10] 谢文燕, 林苏斌. 无线电能传输磁耦合结构分析与优化[J]. 电气技术, 2014, 15(9): 27-31. |
|
|
|
2017, Vol. 18 
