|
|
|
| Research on new method of traveling wave fault location for XLPE cable |
| Shi Zhentang1, Sun Jin1, Yan Tingchun2, Li Dechu3 |
1. SINOPEC Dalian Petroleum and Chemical Research Institute, Dalian, Liaoning 116045;
2. Shandong Kehui Electric Power Automation Limited by Share Ltd, Zibo, Shandong 255000;
3. SINOPEC Guangzhou Branch, Guangzhou 510726 |
|
|
|
|
Abstract In order to solve the problem that the damage of the direct current component to the XLPE cable and the success rate of the fault detection are not high, the problems of the flushing and direct flicker are studied, then concluded that the traveling wave distance measurement is the pulse wave signal produced by the power cable fault point discharge instead of the high injection. The breakdown ability of the pulse signal depends on the capacity of the energy storage capacitor. The output current cannot effectively guarantee the low resistance state of the fault point and so on. The "AC high voltage flashover method" is proposed as the XLPE cable measurement method that is to use the high voltage AC power supply to breakdown the cable fault point, which can provide the continuous operation. Large current can ensure the continuous discharge of the fault point. The validity of this method is proved through simulation analysis and industrial experiment, and the accuracy and reliability of the distance measurement are improved.
|
|
Received: 17 August 2018
Published: 17 April 2019
|
|
|
|
| Cite this article: |
|
Shi Zhentang,Sun Jin,Yan Tingchun等. Research on new method of traveling wave fault location for XLPE cable[J]. Electrical Engineering, 2019, 20(4): 56-60.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2019/V20/I4/56
|
[1] 张峰, 梁军, 车仁飞, 等. 基于行波理论的先进故障测距系统实现算法[J]. 电力自动化设备, 2012, 32(8): 54-59.
[2] 吴刚, 林湘宁. 通用行波测距修正方法[J]. 中国电机工程学报, 2011, 31(34): 142-149.
[3] 曹璞璘, 束洪春, 马仪, 等. 基于雷电记录与行波数据的雷击故障测距结果优化方法[J]. 电力系统自动化, 2016, 40(7): 74-82.
[4] 周伟, 方进, 刘勃, 等. 管内电缆导体传输交流损耗的理论计算和实验[J]. 电工技术学报, 2017, 32(23): 220-226.
[5] 高艳丰, 朱永利, 闫红艳, 等. 一种新型的输电线路双端行波故障定位方法[J]. 电力系统保护与控制, 2016, 44(8): 8-13.
[6] 潘文林. 电缆大截面导体交流电阻测试方法综述[J]. 电气技术, 2017, 18(12): 19-23.
[7] 刘辉海, 赵星宇, 赵洪山, 等. 基于深度自编码网络模型的风电机组齿轮箱故障检测[J]. 电工技术学报, 2017, 32(17): 156-163.
[8] 王丰. 一种输电线路弱故障识别方法[J]. 电气技术, 2018, 19(6): 42-45.
[9] Bernadic A, Leonowicz Z.Determining of fault location with Hilbert-Huang transformation on XLPE cables between land and offshore substations[C]// International Conference on Environment and Electrical Engineering, 2014: 61-64. |
|
|
|
2019, Vol. 20 
