|
|
|
| Line zero-sequence IV segment protection based on amplitude score comparison |
| Xiao Shuoshuang, Jin Longxing, Wang Shixiang |
| Shenzhen Power Supply Co., Ltd, Shenzhen, Guangdong 518000 |
|
|
|
|
Abstract The no-load closing of the high-voltage built-in high-impedance transformer will produce a zero-sequence inrush with high amplitude and slow decay, which will easily cause the misoperation of the zero-sequence IV protection of the line and the whole station to lose voltage in the 220kV substation. At present, there is no literature to propose a corresponding solution. A line zero-sequence IV protection based on amplitude-integration comparison blocking is proposed. The blocking method constructs the blocking curve by using the attenuation characteristic of the zero-sequence inrush. Through the integral comparison of the actual zero-sequence current amplitude curve and the blocking curve, the protection is reliably blocked in the case of zero sequence inrush and can reliably act under the ground fault condition. Moreover, the operation threshold of the blocking criterion is a linear function of the actual zero-sequence current waveform data, which is a floating threshold, without being affected by factors such as voltage closing angle, main transformer remanence, and system operation mode, meaning the blocking criterion has universal applicability.
|
|
Received: 28 June 2019
Published: 27 February 2020
|
|
|
|
| Cite this article: |
|
Xiao Shuoshuang,Jin Longxing,Wang Shixiang. Line zero-sequence IV segment protection based on amplitude score comparison[J]. Electrical Engineering, 2020, 21(2): 56-59.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2020/V21/I2/56
|
[1] 李勇, 苏钟焕, 王然丰, 等. 高压内置型高阻抗变压器励磁涌流计算分析[J]. 变压器, 2017, 54(8): 1-5.
[2] 李晓华, 罗龙波, 谢金泉, 等. 高压内置型高阻抗变压器涌流特性对保护的影响[J]. 电力系统自动化, 2016, 40(11): 108-114.
[3] 谭靖, 肖浩, 李艳, 等. 基于暂态仿真的主变涌流对线路零序过流保护的影响研究[J]. 电力系统保护与控制, 2015, 43(19): 149-153.
[4] 张培夫, 金能, 刘尧, 等. 基于二次谐波含量与趋势变化的母联零序过流保护新方案[J/OL]. 中国电机工程学报.https://doi.org/10.13334/j.0258-8013.pcsee. 182034.
[5] 俞纪维, 董纲, 宋晓斌, 等. 主变空载合闸励磁涌流的分析与探讨[J]. 电气技术, 2016, 17(5): 131-133.
[6] 王友怀, 张浩, 周虎兵, 等. 计及涌流影响的零序电流保护风险评估[J]. 电力系统保护与控制, 2019, 47(10): 120-126.
[7] 马杰, 李磊, 李乃永, 等. 基于故障信息的高阻接地故障辨识与定位方法[J]. 电力系统保护与控制, 2013, 41(11): 74-78.
[8] 刘炳南, 郭谋发, 陈永往. 基于KNN的配电网高阻接地故障识别[J]. 电气技术, 2019, 20(1): 18-23.
[9] 刘涛, 刘鑫, 梁仕斌, 等. 基于极性变化直流电压源的铁磁元件铁心剩磁通测量方法[J]. 电工技术学报, 2017, 32(13): 137-144.
[10] 张师赫, 苏帅, 刘青. 单相变压器直流偏磁及抑制措施分析[J]. 电气技术, 2016, 17(4): 25-28, 34.
[11] 郑彬, 滕文涛, 项祖涛, 等. 基于变压器电流直流分量衰减特性的励磁涌流识别方法[J]. 电网技术, 2017, 41(6): 2020-2026.
[12] 张建松, 何奔腾, 张雪松. 变压器衰减励磁涌流的实用计算方法[J]. 电力系统自动化, 2005, 29(12): 57-60. |
|
|
|
2020, Vol. 21 
