|
|
|
| Design of control system for cylinder valve in hydropower unit based on Siemens S7-300 series programmable logic controller |
| Wu Yachun1, Xiao Ranping1, Shang Jia2, Wang Yajie1, Jiang Xiaohui1 |
1. Department of Mechanical and Electrical, College of Science and Technology of China Three Gorges University, Yichang, Hubei 443002;
2. 710 Research Institute of China Shipubuilding Industry Group Co., Ltd, Yichang, Hubei 443000 |
|
|
|
|
Abstract With the operation of high-head and large-capacity hydropower units, the cylinder valve plays a major role in preventing water leakage because of high pressure and protecting the vanes and bearings. The control system put forward higher requirements, on account of high quality, operation precision and synchronization requirements on cylinder valve. In this paper, the electro-hydraulic proportional valve drives the relay device of the cylinder valve. Based on PID closed-loop control, the relay device can turn on, turn off the cylinder valve, and meet the safe operation requirements of hydropower plant, with Siemens S7-315PLC being the controller.
|
|
Received: 07 November 2019
|
|
|
|
| Cite this article: |
|
Wu Yachun,Xiao Ranping,Shang Jia等. Design of control system for cylinder valve in hydropower unit based on Siemens S7-300 series programmable logic controller[J]. Electrical Engineering, 2020, 21(7): 94-96.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2020/V21/I7/94
|
[1] 李会敏, 杨光永, 陈跃斌, 等. 小型水轮机组主轴密封系统设计[J]. 电气技术, 2018, 19(1): 72-76.
[2] 俸培德, 胡卫, 郑正勤, 等. 大型水电站应用圆筒阀的发展前景[J]. 水电站机电技术, 2006, 29(4): 8-11, 88.
[3] 朱惠君, 张向明. 阿海水电站水轮机圆筒阀[C]//第十九次中国水电设备学术研讨会论文集, 2013.
[4] 曹灿, 武彬, 陈勇旭. 瀑布沟水电站水轮机圆筒阀结构[J]. 水电站机电技术, 2010, 12(6): 49-52.
[5] 李艳杰, 崔天宇, 王海, 等. 比例阀控液压缸位置PID闭环控制的PLC软件实现[J]. 沈阳理工大学学报, 2013, 8(4): 37-40, 46.
[6] 蒋小辉, 韩宏亮. 电气控制与PLC技术[M]. 北京: 中国水利水电出版社, 2017.
[7] 陈军, 李玉榕. 基于S7-300 PLC的单神经元PID控制器设计与实现[J]. 电气技术, 2017, 18(8): 6-11. |
|
|
|
2020, Vol. 21 
