高压配电网剩余供电能力计算及应用

Abstract
Figure/Table
References
Related Citation (2)

Download: PDF (726 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The traditional total power supply capacity model does not take into account the existing load change law of the power grid, and the calculation results are more ideal. Although the concept of residue supply capability proposed solves this problem, but it does not consider the impact of the high-voltage distribution network on the load growth. Therefore, this paper proposes a hierarchical calculation model of the residue supply capability of the high-voltage distribution network. Firstly, the normal operation mode and post fault operation mode of high-voltage distribution network are summarized and treated equivalently. The concept of independent power supply area is defined. Then, ased on the N-1 safety principle, the calculation model of residue supply capability is established and used to evaluate the residue supply capability of high-voltage distribution network under the current grid structure and load level. Finally, the effectiveness and practicability of the method proposed in this paper are verified by the actual grid calculation example.

Key words： high voltage distribution network residue supply capability (RSC) N-1 safety criterion

Received: 14 December 2020

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Zhensheng
	SUN Jialong
	DU Jianxing
	WANG Dan
	WANG Jifei

Cite this article:

LI Zhensheng,SUN Jialong,DU Jianxing等. Calculation method of residue supply capability for high-voltage distribution system and its application[J]. Electrical Engineering, 2021, 22(7): 78-82.

URL:

http://dqjs.cesmedia.cn/EN/Y2021/V22/I7/78

[1] 城市电力网规划设计导则:Q/GDW 156—2006[S]. 2006.
[2] 肖峻, 谷文卓, 贡晓旭, 等. 基于馈线互联关系的配电网最大供电能力模型[J]. 电力系统自动化, 2013, 37(17): 72-77.
[3] 王磊, 刘洪, 曾平良, 等. 计及高压配电线路转供约束的配电系统综合供电能力计算[J]. 电网技术, 2013, 37(12): 3584-3589.
[4] 张曦, 刘友波, 吕林, 等. 计及高压配电网负荷转供的城市220kV片区电网供电能力分析[J]. 电网技术, 2017, 41(5): 1612-1618.
[5] 范黎, 隗震, 娄素华, 等. 配电项目最大供电能力及增供电量效益的评估[J]. 电工技术学报, 2017, 32(增刊1): 84-91.
[6] 韩俊, 刘洪, 葛少云, 等. 面向供电能力提升的主变压器站间联络结构优化建模[J]. 电力系统自动化, 2013, 37(7): 42-47.
[7] 周念成, 谷飞强, 雷超, 等. 考虑合环电流约束的主动配电网转供优化模型[J]. 电工技术学报, 2020, 35(15): 3281-3291.
[8] 肖峻, 李振生, 张跃. 基于最大供电能力的智能配电网规划与运行新思路[J]. 电力系统自动化, 2012, 36(13): 8-14, 31.
[9] 陈思彤, 刘继春. 考虑配网供电能力约束的电力市场交易方法[J]. 电气技术, 2020, 21(7): 8-13.
[10] 赵志强, 高跃, 付高善, 等. 配电系统实际运行的剩余供电能力计算方法[J]. 现代电力, 2018, 35(4): 59-65.
[11] 梁钢, 高明, 宋新甫, 等. 配电网部分馈线的剩余供电能力[J]. 现代电力, 2019, 36(4): 72-78.
[12] 乐健, 王曹, 李星锐, 等. 中压配电网多目标分布式优化控制策略[J]. 电工技术学报, 2019, 34(23): 4972-4981.
[13] 夏侯元, 颜晓娴, 黄俭平. 区域备自投系统动作引起的过负荷研究[J]. 电气技术, 2019, 20(1): 31-35.
[14] 江清楷. 一种能自适应识别母线运行方式的备自投装置应用探讨[J]. 电气技术, 2019, 20(8): 115-117.
[15] 冯力鸿. 高压配网接线方式比较分析[J]. 电气技术, 2013, 14(8): 105-107.
[16] 郭志红, 马强, 陈玉峰, 等. 油浸电力变压器过载能力核算模型参数敏感性研究[J]. 电气技术, 2016, 17(9): 77-82.