|
|
|
| Numerical analysis of hydraulic bulging of generator retaining ring based on finite element method |
| NI Hongqi1, WU Baosheng1, SONG Rongfa2, YANG Bing2 |
1. School of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang 110142;
2. Jiangsu Shengxian Forging Co., Ltd, Changzhou, Jiangsu 213169 |
|
|
|
|
Abstract The static structure analysis function of the finite element software is used to carry out numerical simulation and result analysis for the hydraulic bulging process of the 25 000 kilowatt retaining ring. The stress, strain and the size change of the outer circle of the retaining ring in the bulging process are analyzed, and the difference of the outer diameter between the simulation and actual measurement is analyzed. The results show that the maximum error of the outer diameter during the bulging process of the generator retaining ring is 8.8% under the two conditions of simulation and actual measurement. Therefore, the hydraulic bulging process of the retaining ring can be accurately simulated by using the finite element method, which has high practicability.
|
|
Received: 19 April 2023
|
|
|
|
| Cite this article: |
|
NI Hongqi,WU Baosheng,SONG Rongfa等. Numerical analysis of hydraulic bulging of generator retaining ring based on finite element method[J]. Electrical Engineering, 2023, 24(7): 34-38.
|
|
|
|
| URL: |
|
http://dqjs.cesmedia.cn/EN/Y2023/V24/I7/34
|
[1] 刘贺, 赵艳敏. 50Mn18Cr5护环钢温锻产品开发[J]. 金属加工(热加工), 2015(3): 80-82.
[2] 何文武. 大型护环锻件生产的技术关键[J]. 金属加工(热加工), 2012(1): 27-29.
[3] 成玲燕, 马丽. 发电机转子绕组端部固紧结构的设计校核[J]. 船电技术, 2021, 41(4): 9-14.
[4] 何稼红, 郑文龙. 50Mnl8Cr5护环钢环境敏感断裂行为的研究[J]. 理化检验-物理分册, 1993, 29(3): 9-11.
[5] 吴江枫, 许亮, 刘其源, 等. 1Cr18Mn18N钢护环热成型工艺及冷变形强化[J]. 金属热处理, 2019, 44(11): 171-174.
[6] 李玉坤, 兰波. 汽轮发电机转子护环有限元计算[J].防爆电机, 2017, 52(4): 30-42.
[7] 柳菲, 兰波. 空冷185MW 60Hz汽轮发电机护环及中心环有限元计算[J]. 上海大中型电机, 2016(1): 1-4.
[8] 柴新华, 范国祥. 300MW汽轮发电机护环的有限元分析[J]. 东北电力技术, 1994, 15(5): 35-41.
[9] 胡源, 李静, 黄旭珍. 连续极永磁直线同步电机定位力和推力波动抑制研究[J]. 电气技术, 2022, 23(9): 1-7, 92.
[10] 窦润田, 李永建, 张献, 等. 受工艺孔影响的变压器铁心损耗计算与分析[J]. 电工技术学报, 2022, 37(12): 2909-2923.
[11] 罗吉安, 周星越. 有限单元法分析中应力奇异问题的研究[J]. 廊坊师范学院学报(自然科学版), 2021, 21(4): 42-45.
[12] 潘朗. 机械设计中有限元分析的几个关键问题[J]. 时代汽车, 2021(20): 123-124.
[13] 倪洪启, 朱成实, 罗鹏. 护环毛坯尺寸的确定[J]. 沈阳化工学院学报, 2003(2): 133-135.
[14] 鄢忠方. 钻杆螺纹接头六面体网格划分方法[J]. 煤矿机械, 2021, 42(10): 194-196. |
|
|
|
2023, Vol. 24 
