无铁心圆筒型永磁同步直线电动机磁场分析

Abstract
Figure/Table
References
Related Citation (2)

Download: PDF (2502 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The analytical method effectively solves the problem of long solution time for finite element method in tubular linear motors. Currently, most analytical methods focus on analyzing tubular linear motor with iron core, and there is little analysis on ironless tubular permanent magnet synchronous linear motor (ITPMSLM) without iron core. In response to this issue, this article adopts the separation of variables method to solve ITPMSLM. Firstly, a sub domain analytical model of the motor is established, then the separation of variables method is used to obtain the analytical expression of the air gap magnetic density at no load, and the expressions of the back electromotive force and thrust of the motor are derived. Finally, finite element simulation is conducted, and the results show the effectiveness of this analytical method in analyzing ITPMSLM.

Key words： analytic method tubular ironless the method of separation of variables

Received: 08 June 2023

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	TAN Haoyuan
	LAN Zhiyong
	LUO Yuanjun
	YE Shufan
	ZHU Difei

Cite this article:

TAN Haoyuan,LAN Zhiyong,LUO Yuanjun等. Design and magnetic field analysis of ironless tubular permanent magnet synchronous linear motor[J]. Electrical Engineering, 2023, 24(7): 39-46.

URL:

https://dqjs.cesmedia.cn/EN/Y2023/V24/I7/39

[1] 支凡, 张鸣, 朱煜, 等. 无铁心永磁同步直线电机推力谐波分析与消除[J]. 中国电机工程学报, 2017, 37(7): 2101-2110.
[2] KOU Baoquan, LI Liyi, ZHANG Chengming.Analysis and optimization of thrust characteristics of tubular linear electromagnetic launcher for space-use[J]. IEEE Transactions on Magnetics, 2009,45(1): 250-255.
[3] 卢琴芬, 沈燚明, 叶云岳. 永磁直线电动机结构及研究发展综述[J]. 中国电机工程学报, 2019, 39(9): 2575-2588.
[4] ISHIYAMA N. Linear motor equipped with a stator which is easily assembled: US6040642[P].2000- 03-21.
[5] MIZUNO T, YAMADA H.Magentic circuit analysis of a linear synchronous motor with permanent mag- nets[J]. IEEE Transactions on Magnetics, 1992, 28(5): 3027-3029.
[6] 廖克亮, 兰志勇, 李虎如, 等. 电梯外转子永磁同步电动机等效磁路分析[J]. 电气技术, 2016, 17(4): 12-16.
[7] TOMCZUK B, SCHRODER G, WAINDOK A.Finite- element analysis of the magnetic field and elec- tromechanical parameters calculation for a slotted permanent-magnet tubular linear motor[J]. IEEE Transactions on Magnetics, 2007, 43(7): 3229-3236.
[8] 焦石, 兰志勇, 王琳. 基于解析法的表贴式永磁同步电动机电磁场与齿槽转矩的分析[J]. 电气技术, 2019, 20(4): 7-11.
[9] 任宁宁, 范乐, 杨科科, 等. 轴向充磁圆筒型永磁直线同步电机气隙磁场解析计算[J]. 电机与控制应用, 2019, 46(10): 1-5, 13.
[10] 黄克峰, 李槐树, 周羽. 轴向充磁圆筒型永磁直线电机磁场解析[J]. 哈尔滨工程大学学报, 2013, 34(7): 883-888.
[11] 宋媛, 王淑红. 圆筒型永磁动圈式直线电动机气隙磁场和推力解析分析[J]. 微特电机, 2011, 39(5): 12-13, 25.
[12] 王淑红, 熊光煜. 新型筒型永磁动圈式直线电动机气隙磁场解析分析[J]. 电工技术学报, 2007, 22(5): 40-44.
[13] 赵镜红, 张晓锋, 张俊洪, 等. 圆筒永磁直线同步电机磁场和推力分析[J]. 电机与控制学报, 2010,14(1): 12-17.
[14] 赵镜红, 张俊洪, 方芳, 等. 径向充磁圆筒永磁直线同步电机磁场和推力解析计算[J]. 电工技术学报, 2011, 26(7): 154-160.
[15] 黄克峰, 李槐树, 周羽. 无槽嵌入式圆筒型永磁直线电机磁场解析研究[J]. 防爆电机, 2013, 48(2): 1-5.
[16] 赵云涛, 卢琴芬, 李焱鑫. 无槽圆筒永磁直线同步电机推力波动的解析模型及抑制方法[J]. 中国电机工程学报, DOI: 10.13334/j.0258-8013.pcsee.220961.
[17] 李争, 张家祯, 王群京. U型无铁心永磁同步直线电机磁场建模与分析[J]. 电机与控制应用, 2018, 45(2): 75-80.
[18] 董剑宁, 黄允凯, 金龙, 等. 定子无铁心轴向磁场永磁电机的解析设计[J]. 电工技术学报, 2013, 28(3): 43-49.
[19] MEESSEN K J, PAULIDES J J H, LOMONOVA E A. Force calculations in 3-D tubular structures using Fourier analysis and the Maxwell stress tensor[J]. IEEE transactions on magnetics, 2013, 49(1): 536-545.
[20] GYSEN B L J, MEESSEN K J, PAULIDES J J H, et al. 3-D analytical and numerical modeling of tubular actuators with skewed permanent magnets[J]. IEEE Transactions on Magnetics, 2011, 47(9): 2200-2212.
[21] 董剑宁, 陈艳龙, 黄允凯, 等. 圆筒型无铁心永磁直线电机空载磁场解析计算[J]. 东南大学学报(自然科学版), 2013,43(3): 515-519.
[22] 梁昆淼. 数学物理方法[M]. 5版. 北京: 高等教育出版社, 2020.