基于改进动态时间规整的直流电动机驱动负荷开关卡涩故障辨识

Abstract
Figure/Table
References
Related Citation (1)

Download: PDF (7029 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The load switch may experience jamming during operation, and the current pattern of its energy storage motor can effectively reflect the mechanical state of the switch. Therefore, this paper proposes a fault detection method for load switch jamming based on improved dynamic time warping (IDTW). Firstly, the motor current signal is processed in real time using sliding mean filtering to filter out interfering signals. Secondly, the start and stop criteria for action current recording are formulated to ensure that the complete motor action current is recorded. Thirdly, the dynamic time warping (DTW) is improved by distance formula adjustment, algorithm acceleration and storage space optimization. Taking the current signal of the normal state of the switch as the standard waveform, the IDTW is used to calculate the standardized distance between the comparison waveform and the standard waveform, of which the boundary threshold is formulated to realize the identification of the switch state. Finally, a set of online diagnostic terminals is designed to realize the engineering of the proposed algorithm. The experimental results show that the proposed method has strong adaptability, and the identification accuracy of two types of load switches can reach 99% and 99.37% respectively. The designed on-line diagnosis terminal can complete the identification of the load switch jamming state in a short time.

Key words： load switch jamming fault dynamic time warping (DTW) storage space optimization engineering realization

Received: 12 December 2023

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HUANG Haiyan
	GAO Wei
	QIU Shida
	YANG Gengjie

Cite this article:

HUANG Haiyan,GAO Wei,QIU Shida等. Identification of DC motor driven load switch jamming fault based on improved dynamic time warping[J]. Electrical Engineering, 2024, 25(6): 31-38.

URL:

http://dqjs.cesmedia.cn/EN/Y2024/V25/I6/31

[1] 裴超, 王大磊, 杨占刚, 等. 考虑时空分布的配电网站房巡检策略[J]. 电气技术, 2023, 24(1): 86-90.
[2] 王照, 刘浩. 配电设备生命周期管理研究[J]. 电气技术, 2020, 21(12): 119-123.
[3] 王永明, 陈宇星, 殷自力, 等. 基于CWD及分块SVD的配电开关故障诊断方法[J]. 电子测量与仪器学报, 2020, 34(7): 73-80.
[4] 程显, 袁晓东, 葛国伟, 等. 真空开关高动作稳定性的永磁操动机构控制系统[J]. 电工技术学报, 2021, 36(21): 4617-4626.
[5] 白建伟, 于力, 丛培军, 等. GIS内隔离开关机械故障检测方法研究[J]. 高压电器, 2022, 58(4): 137-144.
[6] 王刚, 彭彦卿, 庄志坚, 等. 基于无刷直流电机电流的断路器手车梅花触头对中度诊断方法[J]. 高压电器, 2020, 56(3): 46-53.
[7] 彭诗怡, 刘衍, 周涛涛, 等. 基于操作力矩的高压隔离开关机械缺陷智能诊断[J]. 电工技术学报, 2021, 36(7): 1356-1367.
[8] 刘云. 220kV断路器重合闸异常动作行为分析[J]. 电气技术, 2022, 23(5): 105-108.
[9] 李敏昱, 李戎, 俞人楠, 等. 一种新型的负荷开关卡涩故障检测方法[J]. 海峡科学, 2023(2): 24-27, 49.
[10] 赵晓晖, 邱方驰, 时亨通, 等. 基于电机电流测量的负荷开关机械状态检测方法研究[J]. 高压电器, 2020, 56(6): 324-328.
[11] 赵莉华, 金浩文, 黄小龙, 等. 基于电机电流的负荷开关操作机构状态诊断研究[J]. 高压电器, 2020, 56(6): 302-308.
[12] 赵莉华, 冀一玮, 吴月峥, 等. 基于电机电流的高压断路器弹簧操作机构的LM-BP故障诊断算法[J/OL].电测与仪表, 1-11[2024-01-31]. http://kns.cnki.net/kcms/detail/23.1202.th.20210917.2207.004.html.
[13] 陈世群, 高伟, 陈孝琪, 等. 一种基于极限学习机和皮尔逊相关系数的光伏阵列故障快速诊断方法[J]. 电气技术, 2021, 22(10): 57-64.
[14] 翁汉琍, 陈皓, 万毅, 等. 基于Bhattacharyya距离算法的线路纵联保护新判据[J]. 电网技术, 2020, 44(2): 751-760.
[15] 叶勤, 刘行, 姚亚会, 等. 便携式RGB-D传感器深度测量与建模精度研究[J]. 同济大学学报(自然科学版), 2019, 47(6): 870-877.
[16] 蔡雨桥, 林培杰, 林耀海, 等. 基于动态时间规整的光伏阵列在线故障检测方法[J]. 电气技术, 2020, 21(7): 42-47.
[17] 张明龙, 张振宇, 高源, 等. 基于变分模态分解的暂态扰动波形去噪算法[J]. 电力系统保护与控制, 2022, 50(8): 43-49.
[18] 李克明, 江亚群, 黄世付, 等. 基于DTW距离和聚类分析的配电台区低压拓扑结构辨识方法[J]. 电力系统保护与控制, 2021, 49(14): 29-36.
[19] 储佳伟, 袁晓冬, 陈兵, 等. 结合小波分析和改进型DTW距离的配电网电压暂降源辨识方法[J]. 电网技术, 2018, 42(2): 637-643.
[20] 童晓阳, 杨明杰, 张广骁. 基于改进DTW的行波波形相似性的高压直流输电线路保护方案[J]. 中国电机工程学报, 2020, 40(12): 3878-3888.
[21] 张怿宁, 张大海, 武传健. 基于直流电抗器电压曼哈顿距离的单端保护方案[J]. 南方电网技术, 2022, 16(2): 58-66.
[22] 邵兴臣, 段发阶, 蒋佳佳, 等. 基于自适应滑动均值和小波阈值的叶尖间隙信号降噪方法[J]. 传感技术学报, 2021, 34(1): 34-40.